COND-USB : TRAIN-GAUGE BRIDGE TO USB CONVERTER

Product catalog summary

Overview
SENSY's COND-USB is a device designed for applications such as force and torque measurement and weighing, with data display on a computer or laptop. It offers high accuracy, very high resolution, and signal linearization capabilities. The device includes toolkit software and features an ABS IP50 enclosure, a DB9 socket for load cell connection, and a micro USB socket with a 1.5 m cable.

Functionality
The COND-USB converts signals from a Wheatstone bridge (mV/V) into a USB signal, facilitating easy connection to computers or PLCs without the need for an additional power supply.

Specifications

Input Range: ±3 mV/V
Sensor Excitation: 4.5 to 5.25 VDC
Non-linearity Error: ≤± 0.0025% Full Scale (F.S.)
Impedance of Wheatstone Bridge: 85 to 5000 ohms
Baud Rate: 115 to 200 kbps
A/D Converter: 50,000 to 200,000 divisions (depending on reading frequency)
Protocol: ASCII
Bandwidth: 1 to 100 Hz
Service Temperature Range: -40 to +85°C (95% relative humidity)
Temperature Coefficient of Sensitivity: <± 0.005% F.S./10°C
Temperature Coefficient of Zero Signal: <± 0.004% F.S./10°C
Maximum Consumption: 68 mA (with a 350-ohm Wheatstone bridge)
Dimensions: 74.5 x 51 x 20 mm
IP Rating: IP50

Additional Information
Specifications are subject to change without notice. The document includes technical drawings and standard dimensions for the COND-USB device.

Catalog excerpts

COND-USB : TRAIN-GAUGE BRIDGE TO USB CONVERTER-1

The COND-USB converts the signal from a Wheatstone bridge (mV/V) into a USB signal. Features o High accuracy o Very high resolution o Linearisation of transducer signal available o Toolkit software included o ABS IP50 enclosure o DB9 socket @ load cell side o Micro USB socket with 1.5 m cable SENSY's COND-USB is perfectly designed for the followings applications: - Force / torque measurement, weighing with display on computer / laptop. ■ Scaling of output signal in measuring unit ■ Easy connection to computer or PLC ■ No need for additional power supply *F.S. : Full Scale. ** : with Wheatstone bridge of 350 ohms. *** : according to reading frequency. **** : 95% relative humidity. Specifications subject to change without notice.

Open the catalog to page 1