*mydirectindustry

Catalogs
SENSY S.A.
COND-SGA : CONDITIONERS-AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANDUCERS

COND-SGA : CONDITIONERS-AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANDUCERS

Product catalog summary

Overview: The COND-SGA conditioners and amplifiers are designed for industrial applications such as weighing, force, and torque measurement. They are compatible with strain-gauge-based transducers and provide standardized current and voltage signals.

Specifications:

Input: Wheatstone bridge 0.1 to 30 mV/V
Output: 4(0)...20 mA, -10...0...+10 V
Power Supply:
- COND-SGA-A: 115...230 VAC / 18...24 VDC
- COND-SGA-D: 18...24 VDC
Enclosure: ABS case, dimensions 164 x 84 x 57 mm

Features:

Zero point and full scale adjustment via internal dip-switches and potentiometers
Internal shunt calibration resistor of 120 kohms
Direct connection to PLCs, display units, industrial instrumentation, chart recorders, or computers

Technical Specifications:

Sensor Excitation: 5 / 10 VDC (Zmin.: 85 ohms)
Non-linearity Error: < 0.03% F.S.
Low Pass Filter: 1...5000 Hz
Bandwidth: DC...6000 Hz
Service Temperature Range: -10...+50 °C
Storage Temperature Range: -20...+70 °C
Temperature Coefficient of Sensitivity: <± 0.07% F.S./10°C
Temperature Coefficient of Zero Signal: <± 0.02% F.S./10°C
Output Tension: 0...10 / -10...0...+10 V (load R. >= 5 kohms)
Output Current: 0...20 / 4...20 mA (load R. <= 500 ohms)
IP Rating: IP67

Additional Information: Specifications are subject to change without notice. Power supply options include 9...36 VDC upon request.

Catalog excerpts

COND-SGA : CONDITIONERS-AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANDUCERS-1

Lwww.sensy.com CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCERS The COND-SGA conditioners - amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on strain-gauge technology. < CD CO I o z o o Features o Input: Wheatstone bridge 0.1 to 30 mV/V o Output: 4(0)...20 mA, -10...0...+10 V o Power supply: - COND-SGA-A: 115...230 VAC / 18...24 VDC - COND-SGA-D: 18...24 VDC o Low-cost o Enclosure: ABS case 164 x 84 x 57 mm Application^ SENSY's COND-SGA are perfectly designed for the following applications: Industrial weighing, Industrial force and torque measurement. Function(s) ■ Zero point and full scale by internal dip-switches and potentiometers ■ With internal shunt calibration resistor of 120 kohms ■ Direct connection to PLC, display unit, industrial instrumentation, chart recorder or computer *F.S. : Full Scale. ** : Power supply 9...36 VDC available on request. Specifications subject to change without notice.

Open the catalog to page 1

COND-SGA : CONDITIONERS-AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANDUCERS-2

TECHNICAL DRAWINGS: CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE BASED TRANSDUCERS COND-SGA-A > STANDARD DIMENSIONS 04.5>7 Fixing centre 148x50 mm For M4 screws

Open the catalog to page 2

COND-SGA : CONDITIONERS-AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANDUCERS-3

TECHNICAL DRAWINGS: CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE BASED TRANSDUCERS COND-SGA-D > STANDARD DIMENSIONS 04.5>7 Fixing centre 148x50 mm For M4 screws

Open the catalog to page 3

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages