*mydirectindustry

Catalogs
SENSY S.A.
COND-A420 : CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCTERS

COND-A420 : CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCTERS

Product catalog summary

Overview: The COND-A420 conditioners and amplifiers are designed for industrial weighing applications, providing standardized signals from load cells, force transducers, and torque sensors based on strain-gauge technology.

Applications: Suitable for industrial weighing with input from Wheatstone bridge configurations (4 or 6 wires). Outputs include 4(0)...20 mA and 0...10 V simultaneously.

Features:

Zero-point and full-scale adjustment via front panel potentiometers (20 turns).
Correction for transducer cable length using 6-wire technology.
DIN rail mounting for easy installation.

Specifications:

Input Range: 0.5...2 mV/V
Sensor Excitation: 10 VDC (120 mA max.)
Non-linearity Error: <± 0.01% F.S.
Bandwidth: 0...10 Hz
Service Temperature Range: -10...+60 °C
Storage Temperature Range: -30...+80 °C
Temperature Coefficient of Sensitivity: <± 0.06% F.S./10°C
Temperature Coefficient of Zero Signal: <± 0.2% F.S./10°C
Power Supply: 230 VAC (50/60 Hz) or 24 VDC
Output Tension: 0...10 V (load R. >= 1000 ohms)
Output Current: 0...20 / 4...20 mA (load R. <= 800 ohms)
IP Rating: IP20

Options: 110 VAC power supply available on request.

Technical Drawings: Dimensions and terminal configurations are provided for both 4-wire and 6-wire connections.

Catalog excerpts

COND-A420 : CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCTERS-1

Lwww.sensy.com CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCERSThe COND-A420 conditioners - amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on strain-gauge technology. Features o Input range: Wheatstone bridge (4 or 6 wires connection (sense)) o Output: 4(0)...20 mA and 0...10 V (simultaneously) o Sensor excitation: 10 V (120 mA max.) available for up to 4 x 350 ohms. Load cells connected in parallel o DIN rail mounting SENSY's COND-A420 are perfectly designed for the following application: - Industrial weighing. ■ Zero-point and full-scale adjustment by potentiometers (20 turns) on the front panel ■ Correction of the influence of transducer cable length (6-wire technology) *F.S. : Full Scale. ** : 110 VAC available on request. Specifications subject to change without notice.

Open the catalog to page 1

COND-A420 : CONDITIONERS - AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCTERS-2

TECHNICAL DRAWINGS: CONDITIONER - AMPLIFIER FOR SRTAIN-GAUGE BASED TRANSDUCERS Brown Ecx. Pink Sense Grey Sense Yellow Exc, White Sig. Green Sig. Shield

Open the catalog to page 2

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages