*mydirectindustry

Catalogs
SENSY S.A.
67000 : NON-CONTACT ROTARY TORQUE SENSORS

67000 : NON-CONTACT ROTARY TORQUE SENSORS

Product catalog summary

Overview: The document provides detailed specifications and applications for SENSY's non-contact rotary torque sensors, specifically the 67000 model. These sensors are designed for torque measurement in various applications, including agricultural machinery, forestry equipment, test benches, production lines, and rotating machines.

Key Specifications:

Bidirectional torque measurement with a range up to 5 kN·m.
Rotational speed capability up to 3600 rpm.
Integrated signal conditioning with analogue output signals.
Standard cable length of 5 meters, with other lengths available upon request.
Torque limit of 5000 N·m.

Performance Characteristics:

Combined error (non-linearity + hysteresis) is less than ±0.5% of Full Scale (F.S.).
Repeatability error is less than ±0.05% F.S.
Rotational signal uniformity is less than ±0.5% F.S.
Compensated temperature range is from +15°C to +35°C, with a service and storage temperature range from -40°C to +85°C.
Temperature coefficient of sensitivity and zero signal is less than 0.5% F.S./10°C.

Electrical Specifications:

Nominal sensitivity is ±4 V, with a zero signal at 5 V.
Power supply requirement is 9 to 28 VDC, with a maximum consumption of 100 mA and a start-up current of less than 150 mA.
IP rating is IP50.

Mechanical Specifications:

Standard dimensions and technical drawings are provided for installation and integration.
Various PTO shaft configurations are available, with specific capacities and dimensions detailed for each model (67000-A, 67000-B, 67000-C, 67000-D).

Wiring and Connections:

Detailed wiring information is provided, including pin color, description, and values for connections such as CAN/USB, angle channels, analogue ground, and supply voltage.

Additional Information:

Specifications are subject to change without notice, and additional capacities and dimensions are available upon request.

Catalog excerpts

67000 : NON-CONTACT ROTARY TORQUE SENSORS-1

General purpose, non-contact rotary torque sensors with flanges or PTO shaft. C€ o Bidirectional o Measurement range up to 5 kN-m o Rotating speed up to 3600 rpm o Integrated signal conditioning o Analogue output signal (see Wiring table) o Cable length: 5 m (other lengths available on request) o Torque limit 5000 N-m Most popular options SENSY's torque sensors 67000 are perfectly designed for the following applications: ■ Torque measurement on machines for agriculture or forestry, ■ Torque measurement on test benches, production lines and rotating machines. * F.S. : Full Scale. ** : see individual calibration sheet Specification subject to change without notice

Open the catalog to page 1

67000 : NON-CONTACT ROTARY TORQUE SENSORS-2

TECHNICAL DRAWINGS: NON-CONTACT ROTARY TORQUE SENSORS 67000 > STANDARD DIMENSIONS Ref. Item Capacities PTO shaft and bush Shaft Bush 67000-A 3 kN-m PTO shaft 6 teeth (1 3/8") < 2.5 kN-m < 5 kN-m • Other capacities and dimensions available on request Accessories BPin Colour Description Value Load direction White CAN / USB H / D- Brown CAN / USB L / D+ Green Angle Channel A 0...5 V Yellow Angle Channel B 0.5 V Grey Analogue GND - Analogue current 4...20 mA Blue Ground GND - Black USB GND - Violet - - Red-Blue - - shaft bush

Open the catalog to page 2

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages