*mydirectindustry

Catalogs
SENSY S.A.
62100-62200 : NON-CONTACT ROTARY TORQUE SENSORS

62100-62200 : NON-CONTACT ROTARY TORQUE SENSORS

Product catalog summary

Overview: The document provides detailed specifications and features of SENSY's non-contact rotary torque sensors, models 62100 and 62200, designed for applications such as torque measurement on test benches, production lines, and rotating machines.

Key Features:

Bidirectional measurement capability.
Cost-effective solution with a measurement range up to 500 N·m.
Rotating speed capability up to 5000 rpm.
Available with round or square shafts.
Integrated signal conditioning with analogue output.
Standard cable length of 5 meters, with other lengths available upon request.

Specifications:

Measurement capacities range from 2.5 to 500 N·m.
Combined error (non-linearity + hysteresis) is less than ±1% Full Scale (F.S.).
Repeatability error is less than ±0.05% F.S.
Rotational signal uniformity is less than ±1% F.S.
Compensated temperature range: +15°C to +35°C.
Service temperature range: -40°C to +85°C.
Storage temperature range: -40°C to +85°C.
Temperature coefficient of sensitivity and zero signal is less than 0.5% F.S./10°C.
Nominal sensitivity is ±2 V with a zero signal of 2.5 V.
Power supply requirement is 6 to 15 VDC with a maximum consumption of 10 mA.
Start-up current is less than 40 mA.
Safe load limit is 130% F.S.
IP rating is IP50.

Dimensions and Wiring:

Detailed dimensions are provided for both square and round drive shafts.
Wiring includes supply voltage (6-15 V), analogue output signal, ground, and reference voltage (2.5 V).

Additional Information:

Technical drawings and standard dimensions are included for reference.
Other capacities and dimensions are available upon request.

Catalog excerpts

62100-62200 : NON-CONTACT ROTARY TORQUE SENSORS-1

General purpose, low-cost, non-contact rotary torque sensors with square or round shaft. C€ o Bidirectional o Cost effective solution o Measurement range up to 500 N-m o Rotating speed up to 5000 rpm o Round or square shafts (see drawing) o Integrated signal conditioning o Analogue output signal (see Wiring table) o Cable length: 5 m (other lengths available on request) SENSY's torque sensors 62100 and 62200 are perfectly designed for the following applications: - Torque measurement on test benches, - Torque measurement on production lines, - Torque measurement on rotating machines. *F.S. : Full Scale. ** : See individual calibration sheet. Specification subject to change without notice.

Open the catalog to page 1

62100-62200 : NON-CONTACT ROTARY TORQUE SENSORS-2

TECHNICAL DRAWINGS: NON-CONTACT ROTARY TORQUE SENSORS 62100-62200 > STANDARD DIMENSIONS DIN 3121 Female end 62200 Round drive (1)(2) Do not loosen or thinten the assembly screws (62100) Square drive shaft (inch) ABC Round drive shaft (mm) • Other capacities and dimensions available on request Dimensions in mm Accessories Colour Description Value Load direction

Open the catalog to page 2

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages