*mydirectindustry

Catalogs
SENSY S.A.
5600 : ECONOMICAL CUSTOM-MADE LOAD PINS

5600 : ECONOMICAL CUSTOM-MADE LOAD PINS

Product catalog summary

Overview: The SENSY 5600 series load pins are designed for force measurement and hoisting applications, offering an economical solution for custom-made installations. These load pins can replace common axles without altering the existing mechanical setup.

Applications:

SL-FORCE: Used for force measurement on cylinders and industrial weighing.
SL-HOIST: Utilized in hoisting devices and crane security, compatible with load limitation electronics.

Key Features:

CE certified electronics and load limiters available.
Compact design with a diameter ≤ 39 mm.
Constructed from stainless steel with IP65 protection.
Standard cable length of 6 meters, customizable upon request.

Specifications:

Capacity range: 0.5 to 14 tons.
Combined error (non-linearity + hysteresis): 0.25 - 1% F.S. for SL-FORCE, 0.5 - 2% F.S. for SL-HOIST.
Repeatability error: <± 0.25% F.S.
Creep error over 30 minutes: <± 0.3% F.S.
Temperature ranges: Compensated (-10 to +45°C), Service (-30 to +70°C), Storage (-50 to +85°C).
Temperature coefficient of sensitivity and zero signal: <± 0.2% F.S./10°C.
Nominal sensitivity: ± 1.5 mV/V for SL-FORCE, ± 1 mV/V for SL-HOIST.
Input and output resistance: 350 ± 2 ohms.
Insulation resistance: > 5000 Mohms at 50 V.
Safe load limit: 150% F.S. for SL-FORCE, 200% F.S. for SL-HOIST.
Breaking load: > 300% F.S. for SL-FORCE, > 500% F.S. for SL-HOIST.
Permissible dynamic loading: 50% F.S. for SL-FORCE, 75% F.S. for SL-HOIST.

Design and Configuration: The load pins are customizable and can be configured using the online configurator available at SENSY's website. They are designed to fit specific mechanical dimensions and load requirements.

Additional Information: Specifications are subject to change without notice, and the document includes technical drawings for reference.

Catalog excerpts

5600 : ECONOMICAL CUSTOM-MADE LOAD PINS-1

Custom-made load pins designed to be installed at the same place of a common axle without change to the existing mechanical environment. Economical version of model LO O i O o CO LO "a3 "O o Features o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts o Useful diameter smaller than or equal to 39 mm o With axial cable gland o Sturdy design o Material: stainless steel o Protection class: IP65 o Cable length: 6 m (other lengths available on request Amplified output SENSY's load cells 5600 are perfectly designed for the following applications: SL-FORCE: Force measurement on cylinders / industrial weighing. SL-HOIST: Hoisting devices and crane security in combination with load limitation electronics. * F.S.: Full Scale. ** Typical range of accuracy, depending on design and dimensions. Specifications subject to change without notice.

Open the catalog to page 1

5600 : ECONOMICAL CUSTOM-MADE LOAD PINS-2

TECHNICAL DRAWINGS: ECONOMICAL CUSTOM-MADE LOAD PINS 5600 > TECHNICAL SPECIFICATIONS Load pins range LOAD PIN DESIGN www.sensy.com/load-pins-configurator/load-pin-design Load-diameter relationship Suitable dimensions * : Subject to SENSY analysis Mechanical dimensions *: Depending directly on the diameter according to DIN 15058

Open the catalog to page 2

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages