*mydirectindustry

Catalogs
SENSY S.A.
5580-5585 : RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE

5580-5585 : RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE

Product catalog summary

Overview: The document provides technical specifications and applications for SENSY's load cells models 5580 and 5585, designed for tension measurement in various cable systems such as towage, haulage, winch force, and ROV umbilical tension control. These models are suitable for a wide range of cable diameters and offer easy installation with a removable center sheave.

Specifications:

Material: Load pin and components are made of stainless steel for model 5580 and nickel-plated steel for model 5585.
Protection Class: IP67.
Capacity Range: From 0.4 to 40 tons, with options up to 600 tons on request.
Temperature Ranges: Reference temperature is 23°C, with compensated range from -10°C to +45°C, service range from -25°C to +70°C, and storage range from -50°C to +85°C.
Electrical Specifications: Nominal sensitivity is ±1 mV/V, input and output resistance are 350 ± 2 ohms, and insulation resistance is greater than 5000 Mohms at 50 V.
Load Limits: Safe load limit is 200% of full scale, breaking load is over 300% of full scale, and permissible dynamic loading is 70% of full scale.

Features: The load cells are customizable, CE certified, and come with a complete range of electronics and load limitation devices. They are designed for easy installation without cutting winch lines.

Dimensions and Capacities: The document provides detailed dimensions and capacities for different models, ranging from 400 kg to 40 tons, with specific dimensions for each capacity.

Additional Information: Other capacities and dimensions are available upon request, and a configurator is available online for custom specifications.

Catalog excerpts

5580-5585 : RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE-1

Lwww.sensy.com RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE ce Load cells specially designed to measure the tension force applied to a running wire rope. The removable center sheave enables easy installation without cutting the winch lines. o Wide range of cables (0 from 6 up to 115 mm) o Protection class: IP67 o Material: - load pin: stainless steel - other components: stainless steel (5580) - other components: nickel-plated steel (5585) o Complete range of CE certified electronics and load limitation devices available o Custom-made manufacturing o Cable length: 6 m (other lengths available on request) Most popular options SENSY's load cells 5580 and 5585 are perfectly designed for the following applications: - Tension measurement of towage and haulage cables, - Winch force measurement, - ROV umbilical tension control, wireline / slickline tension monitoring. * F.S. : Full Scale. ** : can be different (depending on the wire rope) Combined error depends on rope material and on-site calibration Specifications subject to change without notice

Open the catalog to page 1

5580-5585 : RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE-2

TECHNICAL DRAWINGS: RUNNING LINE TENSIOMETERS WITH REMOVABLE CENTER SHEAVE Ref. Item* Capacities 0 rope 0A 0B R1 038 ^ 0115 according to customer’s design specifications (up to 600 t) *x=Material: 5580 - stainless steel; 5585 - nickel-plated steel Configurator: www.sensv.com/tensiometer-configurator/5580-5585 ■ Other capacities and dimensions available on request Other views - Exct - Yellow { Jaune }—|—p + Sig, + Green { Vert }+ -J—j-j—|—r - Sig, - White { Blanc}--1—|- Exct.+ Brown I Brun )+ I . Cable screen not connected to transducer ‘ Faradisation non connects ou capteur Load direction

Open the catalog to page 2

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages