Low cost load cells specially designed to measure the tension force on hoisting ropes. o CE certified for hoisting applications o Easy installation directly without dismantling on the hoisting rope o Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters: from 6 up to 46 mm) o Material: - 5500: stainless steel - 5505: nickel-plated steel o Protection class: IP65 o Sturdy design o Reliable and economical solution o Complete range of "CE" certified electronics and load limiters available o Cable length: see drawing table - CL (other lengths available on request) Application(s) Amplified output SENSY's load cells 5500-5505 are perfectly designed for the following applications: ■ Hoisting devices and crane security in combination with load limitation electronics (e.g.: BRIDGE-BOY, CRANE-BOY, ...), ■ Cost-effective solution for safety improvement on existing cranes. Capacities 5500-5505: 0.25 to 24 t on the wire rope * F.S. : Full Scale. ** : can be different (according to the wire rope) Combined error depends on rope material and on-site calibration Specifications subject to change without notice

TECHNICAL DRAWINGS: WIRE ROPE LOAD CELLS 5500-5505 > STANDARD DIMENSIONS Ref. Item* Load range (t) Min-Max Torque (Optimum) (N-m) * x=Material: 5500 - stainless steel; 5505: alloy steel ** Only for amplified version (4-20 mA 3 wires) Table including sensitivity and SENSY electronics limits for each cable diameter, available upon request • Other capacities and dimensions available on request Dimensions in Other views Load direction , Cable screen not connected to transducer ' Faradisation non connects au capteur