3115-ISO : HIGH-CAPACITY COMPRESSION STANDARD RÉFÉRENCE FORCE TRANSDUCERS

Product catalog summary

Overview: The document provides detailed specifications and guidelines for SENSY's 3115-ISO high-capacity compression standard reference force transducers. These transducers are designed for calibrating testing machines according to ISO 7500, covering a wide range of capacities up to 50 MN.

Specifications:

Material: Alloy steel, with stainless steel available upon request.
Protection Class: IP65.
Cable Length: Customizable as per drawing table.
Capacities: Ranges from 200 kN to 50 MN.

Performance Characteristics:

Relative reversibility error: <± 0.3% M.V.
Relative repeatability error with rotation: <± 0.2% M.V.
Stabilization time: 200-600 seconds.
Creep error over 30 minutes: <± 0.1% F.S.
Temperature Range: Compensated (-10 to +45°C), Service (-30 to +70°C), Storage (-50 to +85°C).

Technical Features:

Nominal Sensitivity: 1.5 mV/V.
Input/Output Resistance: 350-700 ohms.
Insulation Resistance: >5000 Mohms at 50 V.
Safe Load Limit: 110% F.S.
Breaking Load: >300% F.S.

Dimensions and Accessories:

Standard dimensions and technical drawings are provided for various capacities.
Loading pads and other accessories are available, with dimensions specified in mm.

Additional Notes: The document includes technical drawings and specifications for upper and lower loading pads, with options for customization based on customer requirements.

Catalog excerpts

3115-ISO : HIGH-CAPACITY COMPRESSION STANDARD RÉFÉRENCE FORCE TRANSDUCERS-1

Lwww.sensy.com HIGH-CAPACITY COMPRESSION STANDARD REFERENCE FORCE TRANSDUCERS Standard reference force transducers specially designed according to ISO 376 standard (classes 1, 0,5 and 00). o Wide range of capacities (up to 50 MN) o Complete range of load accessories o Protection class: IP65 o Material: alloy steel (stainless steel available on request) o Cable length: see drawing table - CL (other lengths available on request) Most popular options SENSY's load cells 3115-ISO are perfectly designed for the following applications: -TL-TL Digital output - Calibration oftesting machines according to ISO 7500. Note: this standard reference force transducer covers the calibration of standard force measurement instruments used for static verification of uniaxial testing machines. * : Full Scale of the force transducer. ** : M.V. is the measured value. The mentioned values are only valid if M.V. >= 10 % of full scale. Specifications subject to change without notice.

Open the catalog to page 1

3115-ISO : HIGH-CAPACITY COMPRESSION STANDARD RÉFÉRENCE FORCE TRANSDUCERS-2

TECHNICAL DRAWINGS: HIGH-CAPACITY COMPRESSION STANDARD REFERENCE FORCE TRANSDUCERS 3115-ISO > STANDARD DIMENSIONS Ref. Item* Note: 2 - 50 MN (200 - 5000 t) according to customer’s design specification. *x=Material: 3110-ISO - stainless steel; 3115-ISO - nickel-plated steel . Cable screen not connected to transducer ’ Faradisation non connects au copteur Load direction

Open the catalog to page 2

3115-ISO : HIGH-CAPACITY COMPRESSION STANDARD RÉFÉRENCE FORCE TRANSDUCERS-3

TECHNICAL DRAWINGS: LOADING PADS FOR 3115-ISO LOAD CELLS 3115-ISO > CHOICE OF LOADING PADS SECTION 0A SUPOR PADIN Section Pressure Section Pressure Section Pressure Total ■ Other capacities and dimensions available on request

Open the catalog to page 3