2960-2962-2965 : LOW PROFILE (PANCAKE) LOAD CELLS

Product catalog summary

Overview: The document provides detailed specifications and applications for SENSY's low-profile (pancake) load cells models 2960, 2962, and 2965. These load cells are designed for force measurement in various industrial applications, including machine force measurement, industrial process control, hydraulic cylinder monitoring, and fatigue tests.

Specifications:

Capacity Range: 3 kN to 3,000 kN, varying by model.
Material: Stainless steel (2960), anodised aluminium alloy (2962), and alloy steel (2965).
Protection Class: IP66, ensuring resistance to dust and water.
Accuracy Classes: 0.25%, 0.1%, and 0.03% Full Scale (F.S.), with combined error, repeatability error, and creep error specified for each class.
Temperature Ranges: Compensated (-10 to +45°C), Service (-25 to +70°C), and Storage (-50 to +85°C).
Electrical Specifications: Nominal sensitivity of 2 mV/V, input and output resistance of 700 ± 2 ohms, and insulation resistance greater than 5000 Mohms.

Features:

Flat design with high stiffness and fatigue resistance.
Highly resistant to transverse forces.
Complete range of mounting accessories available.

Applications: These load cells are suitable for universal tension and compression force measurement in industrial settings.

Accessories and Dimensions: The document includes detailed technical drawings and dimensions for various accessories, such as load buttons, rod end bearings, and upper loading pads. These accessories are available in different materials and sizes to accommodate specific application needs.

Additional Notes: The document mentions that specifications are subject to change without notice and highlights the availability of CSA and IECEx options for the stainless steel version (2960).

Catalog excerpts

Universal tension and compression load cells for industrial force measurement. o Flat design o High stiffness and fatigue resistant o Highly resistant to transverse forces o Protection class: IP66 o Complete range of mounting accessories available o Material: stainless steel (2960)**, anodised aluminium alloy (2962), alloy steel (2965) o Cable length: see drawing table - CL (other lengths available on request) Amplified output SENSY's load cells 2960-2962-2965 are perfectly designed for the following applications: Force measurement on machines, industrial process control, hydraulic cylinders monitoring, fatigue tests, Hydraulic cylinders monitoring. * F.S. : Full Scale. ** CSA and IECEx options are available only for stainless steel (2960) version. Note: 0.03% only for anodised aluminium alloy (2962) version. Specifications subject to change without notice.

Open the catalog to page 1

TECHNICAL DRAWINGS:LOW-PROFILE (PANCAKE) LOAD CELLS L 2960-2962-2965 > STANDARD DIMENSIONS ACCESSORIES *x=Material: 2960 - stainless steel; 2965 - alloy steel **See EMBOM data sh eet (ACCESSORIES section) Overcapacities and dimensions available on request Dimensions in mm Accessories Wiring Bases are mainly recommended if mating surface is of poor quality (for direct mounting, surface should be U d e^ ) Y 1^10-02 I + ^ 6 DIN 45322 Connector . Cable screen not connected to transducer ' Faradisation non connectee au capteur Load direction FORCE z JJL-

Open the catalog to page 2

TECHNICAL DRAWINGS: TENSION ACCESSORIES FOR 2960, 2962 AND 2965 TECHNICAL DRAWINGS: TENSION ACCESSORIES FOR 2960, 2962 AND 2965 T2960-T2962-T2965 > > STANDARD DIMENSIONS T2960-T2962-T2965 STANDARD DIMENSIONS Ref. Item** Ref. Capacities Ø A Ø Ø A ØE Item** Capacities B B To be defined by the customer To be defined by the customer ** Material: T2960 - stainless steel ; T2962 - aluminium ; T2965 - alloy steel OtherOther capacitiesdimensions available on request capacities and and dimensions available on request

Open the catalog to page 3

TECHNICAL DRAWINGS: LOAD BUTTONS APPUI > STANDARD DIMENSIONS RR Ref. Item* 0A C 0D RR Weight (kg) APPUI-6 APPUI-8 APPUI-10 APPUI-12 APPUI-16 APPUI-16B APPUI-20x1.5 APPUI-24x2 APPUI-30x2 APPUI-36x3 APPUI-36Bx3 APPUI-45x3 APPUI-56x4 APPUI-60x4 APPUI-90x4 * Material: stainless steel Other views SUPOR APPUI

Open the catalog to page 4

TECHNICAL DRAWINGS: ROD END BEARINGS WITH MALE THREAD EMBOM > STANDARD DIMENSIONS Dimension Capacities (N) a * Material: BA - bronze-auto lubricated ; PTFE - polytetrafluoroethylene • Other capacities and dimensions available on request Other view

Open the catalog to page 5