- Catalogs
- SENSY S.A.
- 2715-ISO : STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION
2715-ISO : STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION
2715-ISO : STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION
- Capacities: Available in 20, 30, 50, 75, and 100 kN.
- Design: Universal for tension and compression, compact, with a complete range of load accessories.
- Material: Alloy steel, with stainless steel available upon request.
- Protection Class: IP65.
- Cable Length: Customizable as per drawing specifications.
- Relative reversibility error: <± 0.3% M.V.
- Relative repeatability error with rotation: <± 0.2% M.V.
- Relative repeatability error without rotation: <± 0.1% M.V.
- Stabilization time: 200-600 seconds.
- Creep error over 30 minutes: <± 0.1% F.S.
- Temperature Ranges: Compensated (-10 to +45°C), Service (-25 to +70°C), Storage (-50 to +85°C).
- Temperature Coefficient of Sensitivity: <± 0.035% F.S./10°C.
- Zero Balance: ± 0.02 mV/V.
- Nominal Sensitivity: 2 mV/V.
- Input/Output Resistance: 350 ± 2 ohms.
- Insulation Resistance: > 5000 Mohms at 50 V.
- Reference Excitation Voltage: 10 VDC, with a permissible range of 3-12 VDC.
- Safe Load Limit: 110% F.S.
- Breaking Load: >300% F.S.
- Load cells come with various accessories and dimensions, customizable upon request.
- Technical drawings provide detailed dimensions for load buttons, rod end bearings, and centering pieces.
- Specifications are subject to change without notice.
- Material options include nickel-plated steel and stainless steel for different components.
Catalog excerpts
Lwww.sensy.com STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION Standard reference force transducers specially designed according to the ISO 376 standard (classes 1, 0,5 and 00). o Wide range of capacities o Tension and / or compression (universal) o Compact design o Complete range of load accessories o Protection class: IP65 o Material: alloy steel (stainless steel available on request) o Cable length: see drawing (other lengths available on request) Most popular options SENSY's load cells 2715-ISO are perfectly designed for the following applications: - Calibration oftesting machines according to ISO 7500. Note: this standard reference force transducercovers the calibration of standard force measurement instruments used for static verification of uniaxial testing machines. * : Full Scale of the force transducer. ** : M.V. is the measured value. The mentioned values are only valid if M.V. >= 10 % of full scale. Specifications subject to change without notice.
Open the catalog to page 1
TECHNICAL DRAWINGS: STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION Ref. Item* Capacities 0A H± C D E M H1 H2 ACCESSORIES *Material: 2710-ISO - stainless steel; 2715-ISO - nickel-plated steel • Other capacities and dimensions available on request Note: standard wiring for compression Load direction -1 Exct.~ Yellowi Jaune } ,
Open the catalog to page 2
TECHNICAL DRAWINGS: LOADING PADS FOR 2715-ISO LOAD CELLS 2715-ISO > CHOICE OF LOADING PADS SECTION A-A SUPOR APPUI Ref. Item ACCESSORIES SUPOR © APPUI @ Capacities Section A-A Pressure Section Pressure Total
Open the catalog to page 3
TECHNICAL DRAWINGS: LOAD BUTTONS APPUI > STANDARD DIMENSIONS RR Ref. Item* 0A C 0D RR Weight (kg) APPUI-6 APPUI-8 APPUI-10 APPUI-12 APPUI-16 APPUI-16B APPUI-20x1.5 APPUI-24x2 APPUI-30x2 APPUI-36x3 APPUI-36Bx3 APPUI-45x3 APPUI-56x4 APPUI-60x4 APPUI-90x4 * Material: stainless steel Other views SUPOR APPUI
Open the catalog to page 4
TECHNICAL DRAWINGS: ROD END BEARINGS WITH MALE THREAD EMBOM > STANDARD DIMENSIONS Dimension Capacities (N) a * Material: BA - bronze-auto lubricated ; PTFE - polytetrafluoroethylene • Other capacities and dimensions available on request Other view
Open the catalog to page 5
TECHNICAL DRAWINGS: UPPER LOADING PADS FOR STANDARD REFERENCE LOAD CELLS Other views
Open the catalog to page 6
TECHNICAL DRAWINGS: CENTERING PIECES FOR STANDARD REFERENCE LOAD CELLS * Material: aluminium • Other capacities and dimensions available on request Other views
Open the catalog to page 7All SENSY S.A. catalogs and technical brochures
FORCE AND TORQUE MEASUREMENT6 Pages
0IL & GAS INSTRUMENTATION6 Pages
3500 : SHEAR BEAM LOAD CELLS3 Pages
5050M : SUBSEA LOAD SHACKLES2 Pages
5510 : SHEAR BEAM LOAD CELL5 Pages
4500 : SHEAR BEAM LOAD CELLS3 Pages
5000M : LOAD SHACKLES2 Pages
5300 : STANDARD LOAD PINS2 Pages
5000 : CUSTOM-MADE LOAD PINS4 Pages
Archived catalogs
Force and torque transducers41 Pages
- Display module
- Measuring device
- Data logger
- Test stand
- Measuring machine
- SENSY tension/compression load cell
- SENSY steel load cell
- SENSY strain gauge load cell
- Terminal box
- Digital indicator
- SENSY stainless steel load cell
- SENSY weighing load cell
- Panel panel meter
- Signal amplifying integrated circuit
- SENSY beam type load cell
- Data-logger with screen
- Weighing terminal
- Electronic display panel
- SENSY compression load cell