*mydirectindustry

Catalogs
SENSY S.A.
2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION

Product catalog summary

Overview: The document provides detailed specifications and applications for SENSY's 2712-ISO load cells, designed for tension and compression measurements. These load cells are used primarily for calibrating testing machines according to ISO 7500 and ISO 376 standards.

Specifications:

Capacities range from 0.2 kN to 10 kN.
Material: Anodised aluminium alloy.
Cable length: 3 m, with other lengths available upon request.
Relative reversibility error: <± 0.3% M.V.
Relative repeatability error with rotation: <± 0.2% M.V.
Stabilization time: 200-600 seconds.
Creep error over 30 minutes: <± 0.1% F.S.
Temperature range: Compensated (-10 to +45°C), Service (-30 to +70°C), Storage (-50 to +85°C).
Nominal sensitivity: 2 mV/V.
Input and output resistance: 350 ± 2 ohms.
Insulation resistance: > 5000 Mohms.
Safe load limit: 110% F.S., Breaking load: >300% F.S.

Design Features:

Universal design for tension and compression.
Compact with overload protection.
Complete range of load accessories available.

Technical Drawings and Accessories:

Standard dimensions and technical drawings are provided for various models (2712-ISO-A, 2712-ISO-B, 2712-ISO-D).
Accessories include load buttons, rod end bearings, and upper loading pads, with detailed dimensions and material specifications.

Applications: Primarily used for the calibration of testing machines, ensuring accurate force measurements in both tension and compression scenarios.

Catalog excerpts

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-1

Lwww.sensy.com STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION Standard reference force transducers specially designed according to the ISO 376 standard (classes 1, 0,5 and 00). o Wide range of capacities o Tension and / or compression (universal) o Compact design o Overload protection: see drawing table o Complete range of load accessories o Material: anodised aluminium alloy o Cable length: 3 m (other lengths available on request) Most popular options SENSY's load cells 2712-ISO are perfectly designed for the following applications: - Calibration oftesting machines according to ISO 7500. Note: this standard reference force transducercovers the calibration of standard force measurement instruments used for static verification of uniaxial testing machines. * : Full Scale of the force transducer. ** : M.V. is the measured value. The mentioned values are only valid if M.V. >= 10 % of full scale. Specifications subject to change without notice.

Open the catalog to page 1

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-2

TECHNICAL DRAWINGS: STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION Capacities 0A H1 H2 Breaking Load Max. Deflexion (mm) ■ Other capacities and dimensions available on request Wiring Note: standard wiring for compression Standard1 Cable screen not connected to transducer Faradisation non connects au capteur Load direction

Open the catalog to page 2

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-3

TECHNICAL DRAWINGS: LOADING PADS FOR 2712-ISO LOAD CELLS 2712-ISO > CHOICE OF LOADING PADS 2712-ISO-A / 2712-ISO-B Total weight (kg) ACCESSORIES SUPOR © APPUI © dimensions available on request

Open the catalog to page 3

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-4

TECHNICAL DRAWINGS: LOAD BUTTONS APPUI > STANDARD DIMENSIONS RR Ref. Item* 0A C 0D RR Weight (kg) APPUI-6 APPUI-8 APPUI-10 APPUI-12 APPUI-16 APPUI-16B APPUI-20x1.5 APPUI-24x2 APPUI-30x2 APPUI-36x3 APPUI-36Bx3 APPUI-45x3 APPUI-56x4 APPUI-60x4 APPUI-90x4 * Material: stainless steel Other views SUPOR APPUI

Open the catalog to page 4

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-5

TECHNICAL DRAWINGS: ROD END BEARINGS WITH MALE THREAD EMBOM > STANDARD DIMENSIONS Dimension Capacities (N) a * Material: BA - bronze-auto lubricated ; PTFE - polytetrafluoroethylene • Other capacities and dimensions available on request Other view

Open the catalog to page 5

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-6

TECHNICAL DRAWINGS: UPPER LOADING PADS FOR STANDARD REFERENCE LOAD CELLS Other views

Open the catalog to page 6

2712-ISO : STANDARD REFERENCE FORCE TRANSDUCER TENSION AND COMPRESSION-7

TECHNICAL DRAWINGS: CENTERING PIECES FOR STANDARD REFERENCE LOAD CELLS * Material: aluminium • Other capacities and dimensions available on request Other views

Open the catalog to page 7

All SENSY S.A. catalogs and technical brochures

Archived catalogs

Force and torque transducers
41 Pages