Force &Torque transducers TS411 Torque transducer *Static reaction torque measurement *Capacities from 1 Nm to 5 KNm *Suitable for permanent instrallation *High stiffness *Good accucacy *TEDS module intergrated acc. IEE141.4 *Suitable for mobile or standard application *Cable oputput The electrical torque transducers of the model series 411 with a standard square connection are excellently suitable for static reaction torque measurements. The sensors that are made of stainless steel have an aluminum housing and are characterised by their high stiffness and good accuracy. They are suitable for permanent installation. A TEDS module is already intergrated inside the device. Techical data (acc. VDI/VDE directive 2638) Combined error: < 0,,2% FS Relative linearity error: <0,2 % FS Standard error cof characteristic value : <0,5%FS Standard repeatability error : <0,02%FS Zero signal when removed : 0,01 mV/V Rated characteristic value : 1 mV/V Reference temperature : 21 ºC Rated temperature range : -10/+40ºC Operating temperature range : -15/70ºC Storage temperature range : -30/80ºC Relative creep after 30 min : <+/-0,05%FS Relative creep after 8 h : <+/-0,07%FS Temperature effect on characteristic value per 10 K : <+/-0,002%FS Temperature effect on zero signal per 10 K : <+/-0,002%FS Input resistance : 400 +/- 25 Ohm Output resistance : 350 +/-2 Ohm Insulation resistance : >5 GigaOhm Maximum excitation voltage : 15 Vdc Rated range of excitation voiltage : 5 to 10 Vdc Limit Torque : <150 % FS Breaking torque : < 300 % FS Max. Permissable dynamic load acc. to DIN 50100 : 70 %FS Degree of protection acc. To DIN 60529 : IP 64 SENSOTEC group C/Albert Einstein, 54 Nau 16 – 08940 Cornellà de Llobregat – BARCELONA - www.sensotecgr

Force &Torque transducers 5m shielded cable, 6-core, without plug Nominal ranges & dimmensions Range Code table Range Units (Nm) Cable length (m) Options SENSOTEC group C/Albert Einstein, 54 Nau 16 – 08940 Cornellà de Llobregat – BARCELONA - ww