Force &Torque transducers FS103 *Compression and tension measures. *Ranges up to 600 kN *All made in Stainless steel *Hermetically seeled IP 67 *Sensitivity 2mV/V *TEDS module included *High accuracy OEM force sensor suitable for tension and compresive forces also under dynamic conditions. The electrical force transducers of the model series FSW103 are robust, stiff, corrosion-free and can easily be installed in all positions. They are excellently suitable for tensile and compressive forces, also under dynamic conditions. Their low construction height permits a space-saving application, for example in production integrated materials testing. A TEDS module is always integrated. The option Cl. 0,5 which achieves the class 0,5 according to ISO 376 is used for calibration purposes. Technical data at 20ºC Nominal output signal: 2mV/V Zero signal : up to +/-0,02 mV/V TEDS (Transducer Electronic Data Sheet) output: according to IEEE 1451.4 Combined error: 0,08% FS (optional Class 0,5 according ISO 376) Repeteability in unchanged position : 0,02 % FS Linearity error: 0,05% FS Compensed temperature range : -10 to +40 ºC (temperature efect 10ºK=0,04%FS) Excitation : 5 to 15 Vdc (nominal 10 Vdc) Input resistance : 400 +/- 25 Ω Output resistance : 350 +/- 2 Ω Insulation resistance : < 5 GΩ Operating temperature range : -15 to +60 ºC Degree of protection acc. DIN6059 : IP 67 Permisible dynamic load (acc. To DIN 50100) : < 75 % rated range Limit force : < 150 % rated range Breaking force : < 350 % rated range SENSOTEC group C/Albert Einstein, 54 Nau 16 – 08940 Cornellà de Llobregat – BARCELONA - www.sens

Force &Torque transducers Dimensions en mm Range 5 to 20 kN Range 50kN, 100kN Range 200 to 600 kN Connection Order code Range Units (kN) Cable length (m) Options white red yelow blue green black TEDS Data Exctitaton + Output+ Excitation – Output – TEDS GND Shield SENSOTEC group C/Albert Einstein, 54 Nau 16 – 08940 Cornellà de Llobregat – BARCELONA - www.sensotecgr