FS-012

FS-012

FS-012

Product catalog summary
Overview: The FS-012 is a non-intrusive flow switch designed for liquid measurement using clamp-on transducers. It is microprocessor-based, user-friendly, and field programmable, allowing for flow measurement without interrupting the process flow. It features a low installation cost and a 2-line LCD display showing flow rate.
Specifications:
  • Flow velocity range: 0.02 to 12 m/s
  • Transducer pipe size compatibility: 20 to 3000 mm
  • Alarm LED indication
  • Power supply: 10 to 36 Vac/Vdc
  • Standard consumption: 2.0 VA
  • Dimensions: 160 x 120 x 62 mm
  • Enclosure: ABS with neoprene gasket
  • Display: LCD with backlight, 2 x 20 characters
  • Keypad: 4 x 4 key membrane
  • Language options: English, Italian, Turkish
  • Operating conditions: -15 to 50ºC, 10 to 98% RH
Measuring Conditions: The device uses the transit time principle with ultrasonic transducers mounted upstream and downstream. It measures the difference in transit times to determine liquid velocity.
Fluid and Pipe Conditions:
  • Suitable for clean liquids with particles < 10000 ppm and size < 80 µm
  • Compatible with various pipe materials including metals, plastics, and fiberglass
  • Requires a minimum straight pipe run of 15 to 30 times the pipe diameter
Transducer Specifications:
  • Type A: DN20 to DN100
  • Type B: DN50 to DN700
  • Type C: DN300 to DN3000 (not available)
  • Fluid temperature range: -10 to 80ºC
  • Protection: Standard IP67, optional IP68
Installation and Operation:
  • Easy installation with no special tools required
  • Single-person setup with a screwdriver
  • Program the unit with pipe and fluid data, and switch point
  • Install sensors at the required distance and position
  • Unit displays flow and activates switch
Ordering Information: The ordering code FS012 includes options for sensor type, output type, cable length, and additional specifications.
See more

Catalog excerpts

FS-012-1

FS-012 Non intrusive flow switch Flow switch with clamp-on transducers able to use in non-invasive liquid measurement. Microprocessor based, user friendly, field programmable flow measurement technique allows no interruption of the process flow and has low installation cost  2 line LCD display with flowrate  Wide range velocities of 0,02 to 12 m/s  Transducers pipe size from 20 to 3000 mm  Alarm led indication Measuring conditions Transit time principle TTP utilizes a pair of ultrasonic transducers which are mounted on the pipe upstream and downstream respectively. Each transducer functions as both ultrasonic transmitter and receiver. The main unit operates by alternately transmitting and receiving a coded burst of sound energy between the two transducers. The transit-times in the upstream direction as well as in the downstream direction are measured. The difference of the two transit times is directly and exactly related to the velocity of the liquid in the pipe, Fluid types Virtually all commonly used clean liquids with small quantity of tiny particles up to concentration < 10000 ppm and particle size less than 80 µm. Liquid must to be free of bubbles and turbulences Pipe conditions Pipe material can be all metals, plastics, fiber glass, etc. , quite all of homogeneous pipes. Allow pipe liner. Pipe straight run must to be 15 or 30 times pipe diameter as minimum free straight pipe to warranty minimum turbulences. Packaging list ●Main unit ●Clamp on transducers with cable ●High viscosity coupland kit ●Clamp on SS fixture ●Instruction manual (English, Italian or S

 Open the catalog to page 1
FS-012-2

Main Specification Power supply: 10 to 36 Vac/Vdc not insolated Standard consumption: 2,0 VA Dimensions (main unit): 160 x 120 x 62 mm without plugs Enclosure: ABS provided by neoprene gasket. Front face polycarbonate. Electrical connection: Power supply + output contact by DIN 43650A connector. Sensors plug 3 pin aviation connector. Protection access: keyboard password Display: LCD with backlight 2 x 20 characters Keypad: 4 x 4 key membrane with tactile action Language: English, Italian, Turkish (optional) Measuring methods: Reflex type( “V” installation), double Reflex type, (“W” installation)...

 Open the catalog to page 2

All Sensotec Instruments catalogs and technical brochures

  1. LTM-8811

    2  Pages

  2. DPM-599

    4  Pages

  3. FLC-16

    4  Pages

  4. LHF-12

    2  Pages

  5. LHF-08

    2  Pages

  6. LTFC-300

    4  Pages

  7. LTFM-120

    4  Pages

  8. TS411

    2  Pages

  9. T2N

    1  Page

  10. TRG

    2  Pages

  11. TRB-HRT

    4  Pages

  12. T-62

    2  Pages

  13. FS103

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.