Sirius SS09 / SI16
4Pages

Small and Easy to Install Radiation Pyrometers 1-channel pyrometers for non-contact temperature measurement in the short wavelength range, primarily for measurements on metals, bare and shiny materials, ceramics and graphite. 2 wavelength ranges available for temperature ranges from 250 or 550°C Temperature sub range adjustable in order to increase the accuracy of the analog output Full digital signal processing with low uncertainty Fast data acquisition with a response time of only 5 ms Different optics selectable with small spot sizes from 1.3 mm Laser target marking for precise alignment to the measuring object Green LED power indicator Switchable analog output 0 / 4-20 mA and serial interface RS232 or RS485 Easy device configuration via interface using the supp

| Small, Easy to Install, Short-Wave The pyrometers of series Sirius offers an extensive equipment combined with a high-quality internal side, despite its small size. The fully digital signal processing ensures the highest accuracy even at low emissivity levels, the adjustment to different measuring distances allows to find the smallest spot size or the optimum installation location. The models SS09 and SI16 differ in their spectral ranges and thus to their measuring ranges. With their short-wave spectral ranges preferably very good measurements at high emissivity of metals, ceramics or...

Features Stainless steel housing: ■■ Small, round 40 mm housing for easy installation LED: ■■ Power Indicator Laser targeting light: ■■ Laser target marking for easy alignment to the measuring object Optics: ■■ Adjustable measuring distance Digital and analog output: ■■ Serial interface up to 57.6 kBd ■■ Switchable standard analog output 0/4-20 mA Peak picker: ■■ For safe measuring of short-term temperature peaks Optics The following tables show the optical data of the different device types. For reliable measurement the measurement object should be at least as large as the spot size. The...

The PC software SensorTools is our standard software for: ■ Measurement display ■ Measured value recording ■ Processing the results ■ Display devices inside temperature ■ Changing pyrometer parameters Program functions: ■ Change pyrometer parameters ■ Direct measurement data playback ■ Adapt recording mode to computer performance ■ Export measured values in csv files ■ Record interval setting for adapted data size ■ External start and stop of recording measured values (via control input on the pyrometer) ■ Switch laser targeting light on and off ■ Back time recording of measured values...