Regulus RF / RD PID Program Controller Regulus RF for panel mounting Regulus RD in desktop housing Ultra Fast, Intelligent and Precise Control of Process Heating Applications: ■■ ■■ ■■ ■■ ■■ ■■ ■■ Induction surface hardening Induction heating Induction soldering Inductive annealing Inductive heat shrinking Inductive melting Conductive heating treatment Extremely fast sampling time of 100 µs 990 program steps within 26 programs Automatic detection of up to 2 Sensortherm pyrometers Thermo couple inputs optional Measurement range overlap control AutoTune function for automatic P and I value detection Multiple I/O’s: 7 digital outputs and 6 digital inputs Emissivity adjustable for every program step Easy programming via software

Overview Regulus RF and RD are programmable PID temperature controllers for panel-mounting or as bench model. They are optimized for use with Sensortherm pyrometers. When using two pyrometers (only Regulus RD) a second measuring point can be used for a redundant measurement. Selecting pyrometers with different measuring ranges, these can be combined to an expanded and thus very large total measuring range. Instead of a second pyrometer also a model with additional thermocouple input type K or S can be selected. JJ Pyrometer for Temperature Reading The rapid response time of Sensortherm pyrometers...

Display of activated limit switches General status display Activity display of the manipulated variable output Device operation: ■ Access to device parameters and programs ■ Pyrometer's laser targeting light on / off ■ Start preconfigured control programs

Controller Connections The signal transmission of the measured temperature from the pyrometer to the controller can be 4-20 mA analog, or digitally via RS232 or RS485. A 0-10 V or 0-20 mA signal power specification to the generator is selectable. The temperature sensor, controller and generator form a closed circuit that requires only a start / stop signal. The protocol converter PN10-00 allows Profinet connection of up to five Regulus controllers to a higher-level control. All necessary parameters are accessible and programs stored in the controller can be selected and started via the Profinet...