Polaris PS09 / PI16
2Pages

Infrared Temperature Switch (Hot Metal Detector) Infrared temperature switch for non-contact detection of hot metal parts or overheating, thereby triggering switching operations which are used for sorting or activating a cooling or similar. ■ 2 models with different wavelength ranges for temperature ranges from 250°C to 550°C ■ 2 transistor switching contacts with adjustable switching temperatures as well as switching hysteresis ■ Full digital signal processing with low uncertainty ■ Fast data acquisition with a response time of only 4 ms ■ 3 optics available for different measuring distances, spot size diameter from 1.3 mm ■ Laser target marking for precise alignment to the measuring object ■ 3 status LEDs for operational readiness and active switching outputs ■ Simple switching point parameterization via interface and supplied software

| Just Switch The infrared temperature switches Polaris are mainly used for non-contact detection of hot metal parts and triggering a switching operation. They are equipped with 2 switching contacts with adjustable switching temperatures. Polaris temperature switches measure in the short wave spectral range and are therefore mainly used for measuring of metals, ceramics, graphite, etc. The devices are configured via the PC software SensorTools or via interface commands. For this purpose, the connection to a PC via serial interface is necessary, e.g. via USB interface converter. The...