VOLT LITEWIRE FEATURES Analog output for waveform analysis Fiber optic cable delivers signal to ground Compatible with portable test analyzers HIGH VOLTAGE VOLTMETER PROBE MEASURE PRIMARY WAVEFORMS This probe provides waveform analysis for sophisticated low voltage analyzers, which are otherwise incapable of measuring primary distribution voltage up to 40 kV. The Volt Litewire is a two-piece, True RMS voltmeter with a fiber optic link between the high voltage sensor and the readout at ground potential. The sensor is mounted on a hot stick and slipped onto a medium voltage line for measuring voltage phase to phase or voltage phase to ground. The fiber optic cable connects the sensor to a receiver unit at ground potential, which contains the digital readout and provides an analog output. The instrument has no moving parts and does not require clamping onto the wire. The housing is made of urethane and built to operate in severe utility environments. The fiber optic cable is physically rugged, while providing the high speed data path required for digital waveform transmission from the sensor to the display unit. It is tested to provide 100 kV isolation per foot, higher than the meter rating. The analog output is the unique feature of this instrument. It is a reproduction of the high voltage current waveform, available as a 0 - 2 volt AC signal at ground. This provides utilities the ability to use one of many sophisticated low voltage scopes, waveform acquisition recorders, analyzers, or other analysis instruments, which are otherwise not capable of analyzing measurements in primary distribution and medium voltage environments. Volt Receiver at Ground

APPLICATIONS Waveform analysis of primary conductors Connect to low voltage analyzers for monitoring high voltage waveforms VOLT LITEWIRE SPECIFICATION Model Number Range of Operation Voltage Resolution Voltage 0-20 kVAC Voltstik Weight Analog Output Output Impedance Frequency Response 2500 Hz, which is above the 40th Harmonic at 50Hz or 60Hz Operation Controls Single button switch operation per unit. One switch on the transmitter, one switch on the receiver Mechanical Display 3.5 Digit Display on Receiver Shock & water resistant molded urethane Universal chuck adapter (hot stick not included)...