AMP LITEWIRE HIGH VOLTAGE AMMETER PROBE FEATURES Analog output for waveform analysis Fiber optic cable brings signal to ground Open CT rejects stray magnetic fields Easily slip on and off the conductor Compatible to portable test analyzers MEASURE PRIMARY CURRENT WAVEFORMS This probe provides waveform analysis for sophisticated low voltage analyzers, which are otherwise incapable of measuring primary distribution in high voltage. The Amp Litewire is a two-piece true RMS high voltage rated ammeter designed to measure True RMS current on the primary side of a distribution network. The sensor probe is attached to an insulated hot stick and positioned onto the medium or high voltage line. A fiber optic cable connects the sensor probe to a receiver unit at ground potential, which delivers the current waveform measurement as an analog output to a meter analyzer. The analog output is a reproduction of the high voltage current waveform, accurate to the 50th harmonic, and available as a 0 - 2 volt AC signal at ground. This probe provides utilities the ability to use one of many sophisticated low voltage scopes, waveform acquisition recorders, analyzers, or other analysis instruments, which are otherwise not capable of analyzing measurements in primary distribution and high voltage environments. The fiber optic cable is physically rugged, while providing a high speed data path required for digital waveform transmission. The cable is the high voltage insulator between the two units, and is specified to provide 100 kV isolation per foot. The sensor probe has no moving parts and does not require clamping onto the wire. The housing is water resistant and will withstand high physical impact. XT Amp Litewire + Hanger Attachment The Amp Litewire is known to be compatible with low voltage analyzers by Radian, MTE, EMH, CALMET, FLUKE, Dranetz, ZERA, Probewell, and EMSYST.

Meters for safe + accurate live-line work. AMP LITEWIRE PRODUCTAPPLICATIONS Compatible with many low voltage analyzers Output current for waveform analysis of primary conductors Allows low voltage analyzers to monitor high voltage waveforms For more information, scan this code to reach our website Telephone: +3601 595 1000 Email: [email protected] Website: www.sensorlink.com Copyright 2024 SensorLink® Corporation. All Specifications are subject to change without notice.