CURRENT RECORDER FEATURES Open CT sensor with 1% accuracy Easily deploy to the line in seconds Recorded data downloads via IrDA Review and graph data for analysis Graphing with Softlink ^ SensorLink COLLECT + ANALYZE LOAD PROFILES This medium voltage amp recorder temporarily deploys onto primary or secondary overhead lines with easy installation, retrieval, and data download. The true RMS inductive sensor does not use magnetic materials and has no moving parts. The opening of the sensor is electronically closed, while any external currents are electronically rejected. The accuracy, current reject, and range of currents measured by the amp sensor substantially exceed the performance of other industry sensors. The key feature of the Amcorder is the ability to leave it deployed on the line to record average current readings, at user-defined intervals, for 90+ days. It easily attaches to the line with a hot stick and once on the line it begins to collect and record the current load. The Amcorder is equipped with an infrared USB port for communicating the recorded data into the user's computer. Data is downloaded to SensorLink's Softlink software, a user-friendly interface that allows the user to download, view, graph, and export the measurements. Data is saved as an .xml or .csv file, allowing it to be opened and analyzed into other data management programs. The housing of the Amcorder is built to operate safely, even in severe utility environments. It is resistant to shock, repels water, unsusceptible to flame, and operates in a wide temperature range. Deploy Amcorders to record load profiles on all phases and retrieve them days, or weeks, later for download and data analysis. Once downloaded of data they are ready for deployment at the next service location.

Check for load balance Conduct load studies Meter verification Power diversion studies Model Number SensorLink® Corporation 1360 Stonegate Way Ferndale, WA 98248 p: +360.595.1000 e: [email protected] www.sensorlink.com