Aerospace Energy Measurement Railway Sensorex® Submersible servo-accelerometer (Z) SX41170 ATEX Utilization range • Electrical : Power supply: 19 VDC to 30 VDC with a 350 □ max. load • Protection index: This servo-accelerometer has an IP 68 protection index • Temperature : Operating temperature: -40°C/+85°C Storage temperature: -55°C/ +85°C This single axis servo-accelerometer is designed to be used in vertical position; the gravity acceleration is compensated. The 4-20mA current output is proportional to the acceleration. This servo-accelerometer is particularly appropriate for hard environment applications. Its floated sensitive element allows it to withstand against high vibration and shock levels. Its mechanical design allows it to resist to 100 bar external pressure. Besides, its electronic circuit is designed to be insensitive to electro-magnetic perturbations. This servo-accelerometer can be used : - In surface industries - In permanent presence of gaseous explosive atmosphere - With the gas listed in subdivisions IIA, IIB, IIC Applications • Vertical acceleration measurement • Crane-ship turret stabilization Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners MEGGiTT smart engineering for extreme environments

Sensorex® Submersible servo-accelerometer (Z) SX41170 ATEX Contact General specifications at +25°C Power supply Range(*) Consumption Output signal Noise Non linearity Zero null voltage Non repeatability et hysteresis Output impedance Cross axis sensitivity Housing sensitive axis alignment Zero thermal drift 19V to 30V (350 ohms max. load on current output) ±0.5g S 30mA (except current output) 4-20mA ±0.08mA < 2mVrms < ±0.05% of FS S 0.15% of FS < 0.001% of FS < 240 ohms S 0.005g/g ±0.5° < 0.01% of FS/°C Sensitivity thermal drift < 0.01% of measure/°C Note: this servo-accelerometer must be associated...