*mydirectindustry

Catalogs
SENSOREX MEGGITT
SX3310 strain gauge conditioner

SX3310 strain gauge conditioner

Product catalog summary

Overview
Meggitt Sensing Systems specializes in various measurement products including LVDTs, inertial systems, inclinometers, accelerometers, IMUs, MEMS sensors, servo-inclinometers, and conditioners. The SX3310 is a DIN box strain gauge conditioner designed for industrial applications.

Key Specifications

Power Supply: 24VDC ±8VDC
Transducer Excitation: 5VDC or 10VDC
Output Signal: 0/10V or ±10V and 4-20mA
Wiring Transducer: 4 or 6 wires

Mechanical & Environmental Characteristics

Fixing: Track DIN EN 50022
Dimensions: 115x100x23 mm
Box Material: Polyamide PA
Protection: IP 20
Inflammability: VO (UL94)
Vibrations: 2g (white noise)
Weight: Approximately 130 g
Operating Temperature: 0°C to +70°C
Storage Temperature: -40°C to +85°C
Temperature Stabilization Time: 15 minutes

Electrical Specifications at +25°C

Power Supply: 24VDC ±8VDC, Maximum Consumption: 150mA
Strain Gauge Excitation: 5VDC or 10VDC
Minimum Impedance for 5VDC Excitation: 80Ω
Minimum Impedance for 10VDC Excitation: 120Ω
Sensitivity: 0.3 to 12mV/V
Input Amplifier Current: 5nA, Impedance: 1010 ohms typical
Gain: Maximum 8500, Minimum 80
Zero: Maximum for a 120 ohms impedance ±3.25mV/V
Filter (3rd order): Maximum 5000Hz ±10%, Minimum 3Hz ±10%
Voltage Output: Maximum non-linearity Gain=1000/ ±0.001% of Full Scale, Short Circuit Current ±22mA, Outputs 0/10V or ±10V
Current Output: Maximum non-linearity ±0.015% of Full Scale, Impedance 40MΩ typical, Load Resistor (for 16VDC power supply) 600Ω max.
Thermal Drift/Input Offset Voltage Drift: Sensitivity ±2.10-8 x gain ppm/°C/FS, 150ppm of signal/°C

Contact Information
Meggitt (Sensorex), Archamps Technopôle, 196 Rue Louis Rustin, 74166 ARCHAMPS- France. Tel: 04 50 95 43 70, Fax: 04 50 95 43 75, www.sensorex.fr, www.meggitt.com

Catalog excerpts

DIN box strain gauge conditioner SX3310 module is a strain gauge conditioner with very low bridge impedance (down to 120 This module has a very simple and practical zero and scale adjusting with dip-switches and Connections for power supply, transducer and output signals are made by screw terminals to facilitate maintenance and installation. This industrial unit in polyamide PA PHOENIX EM type may be plugged into any common DIN Power Supply L_ hw.rsnwij Amph + Filter Output Interlace Meggitt (Sensorex) Archamps Technopole Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners extreme environments

Open the catalog to page 1

Aerospace Energy Measurement Railway DIN box strain gauge conditioner SX3310 Mechanical & environmental characteristics Screw terminal Operating temperature Storage temperature Temperature stabilization time Electrical specifications at +25°C Power supply Power supply Maximum consumption Strain gauge excitation Strain gauge Mini. impedance for 5VDC excitation Mini. impedance for 10VDC excitation Sensitivity Input amplifier Current Impedance Gain Maximum Minimum Zero Maximum for a 120 ohms impedance Filter (3rd order) Maximum Minimum Voltage output Maximum non linearity Short circuit current Outputs...

Open the catalog to page 2

Aerospace Energy Measurement Railway DIN box strain gauge conditioner SX3310 Contact Selection guide Product reference Meggitt (Sensorex) Archamps Technopôle 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners

Open the catalog to page 3

SX3310 strain gauge conditioner

SX3310 strain gauge conditioner

Catalog excerpts

All SENSOREX MEGGITT catalogs and technical brochures