Aerospace Energy Measurement Railway Submersible servo-inclinometer/ accelerometer SX41170 Characteristics  High performances  Excellent temperature stability  Very high resistance to shocks and vibrations (accreditation GAM T13)  316L stainless steel rugged and 100 bar submersible housing  Submersible connector (100 bar en-cast)  Conform to European Standard of Electromagnetic compatibility Meggitt (Sensorex) SX41170 servo-inclinometer/ accelerometer is DC in/ DC out single axis inclination sensor. The output is proportional to the sine of the angle. This inclinometer/ accelerometer is available with a voltage or a current output, and with an axial or radial connector. It is particularly adapted to hard environmental conditions. Its floated sensitive element allows it to survive high vibrations and shocks levels. Moreover, its electronic circuit is designed to be insensitive to electro-magnetic perturbations. Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners Applications  LNG ship pitch & roll control  Offshore platform pitch & roll control

Submersible servo-inclinometer/ accelerometer Power supply Consumption (except current output) Cross axis sensitivity Electrical noise Bias thermal drift Sensitivity thermal drift Operating temperature Storage temperature Selection guide 10V to 30V (for voltage outputs) / 15V to 30V with max 350 Q load on current output (for current Product reference Axial connector Product reference Radial connector Meggitt (Sensorex) Archamps Technopole Special bandwidth Special range and output signal Zero offset (unipolar output) Intrinsically Safe version (see ATEX chapter) Linearity < 0.02% of FS (except...