Catalogs >
SENSOREX MEGGITT >
Servo inclinometer / accelerometer - SX41200 series

Servo inclinometer / accelerometer - SX41200 series
2Pages

Catalog excerpts

Servo inclinometer / accelerometer - SX41200 series - 1

Aerospace Energy Measurement Railway Single axis servo-inclinometer/ accelerometer SX41200 Characteristics  High performances  Excellent temperature stability  Very high resistance to shocks and vibrations (accreditation GAM T13 and EN 50155)  Rugged, watertight IP65 sealed housing for severe environments  Conform to European standard of network The Meggitt (Sensorex) SX41200 is a single axis closed-loop servo-inclinometer/ accelerometer, designed to provide high reliability tilt or acceleration measurements within extreme environments, and particularly those characterized by high shock and vibration inputs. The highly rugged design of the SX41200 incorporates a galvanometric pendulum sensing element with hydro-mechanical damping, combined with an optical position sensor, with voltage or current output, proportional to the sine of the angle of tilt. When the instrument is submitted to a certain angle alpha, the galvanometric pendulum tends to move in the direction of the inclination. Its position is detected and converted into a current which feeds back to the galvanometer in order to bring it back to its initial position. Alignment of structures (rolling mills, alternators…) Safety purpose (cranes, offshore platforms…) Levelling (roads, railway tracks…) Angular measurements Positioning of shooting platforms, radar antennas… This current, proportional to the measured gravity, passes through an accuracy resistor and provides the output voltage. An output amplifier gives low output impedance. Detection of ship roll and pitch Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners

Open the catalog to page 1

Servo inclinometer / accelerometer - SX41200 series - 2

Single axis servo-inclinometer/ accelerometer Power supply Consumption (except current output) Cross axis sensitivity Electrical noise Bias thermal drift Sensitivity thermal drift Operating temperature Storage temperature Selection guide ±5V or 4-20 mA (minimum power supply 15V, max From 4Hz to 12 Hz according to range < 15 mV (on voltage output models) Reference (current output) Reference (voltage output) Special bandwidth Special range and output signal Zero offset (unipolar output) Linearity < 0.02% of FS (except for range ±90°) Meggitt (Sensorex) Archamps Technopole Meggitt Sensing...

Open the catalog to page 2