*mydirectindustry

Catalogs
SENSOREX MEGGITT
Metrology gauge head - SX8MM series

Metrology gauge head - SX8MM series

Product catalog summary

Overview
Meggitt Sensing Systems specializes in various measurement products including LVDTs, inertial systems, inclinometers, accelerometers, IMUs, MEMS sensors, servo-inclinometers, and conditioners. These products are applicable in sectors such as aerospace, energy, measurement, and railway.

Product Description
The Sensorex SX8MM is a metrology gauge head that combines high-accuracy mechanics with an inductive sensor. It is capable of measurements at a maximum frequency of 60 Hz and can endure nearly 20 million cycles. The gauge heads come with a 2-meter polyurethane cable and a DIN connector, featuring a measuring insert with a 3mm diameter rolling bearing. The device is protected against water and dust by a rubber covering.

Specifications

Electrical Stroke: ±0.5mm, ±1mm, ±2mm, ±5mm
Mechanical Stroke: 2.1mm, 4.3mm, 10.3mm
Non-linearity: ±0.25% of Full Scale
Accuracy: ±0.2 to ±0.01 microns
Force at Zero Position: 0.6 to 0.9 N
Operating Temperature: 0°C to 65°C
Relative Humidity: 80%
Protection: IP63 to IP65
Sensitivity: 83 to 46 mV/V/mm at 5kHz
Zero Thermal Drift: ±0.5 to ±0.09 microns/°C
Sensitivity Thermal Drift: ±500 to ±50 ppm/°C

Applications
The SX8MM is suitable for use in test benches and metrology applications.

Contact Information
Meggitt (Sensorex) is located at Archamps Technopôle, 196 Rue Louis Rustin, 74166 ARCHAMPS, France. They can be contacted via phone at 04 50 95 43 70 or fax at 04 50 95 43 75. More information is available on their websites: www.sensorex.fr and www.meggitt.com.

Catalog excerpts

Metrology gauge heads • Rolling bearing measuring spindle • Axial or radial cable output • Excellent repeatability • Accessories (measuring The Meggitt (Sensorex) SX8MM combines a high accuracy mechanics with an inductive sensor to enable measurements at a maximum frequency of 60 Hz with nearly 20 million • Test benches cycles. • Metrology Gauge heads are delivered with 2 meter polyurethane axial or radial cable with DIN connector. At the other end, the sensor has a measuring insert with a rolling bearing (3mm diameter). The waterproofing and dust proofing of the measuring spindle guide is provided thanks to a protective rubber. This sensor is an AC/AC LVDT; it has to be used with a conditioning unit model SX3120, All our signal conditioners are detailed in chapter "electronic conditioners". Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners extreme environmen

Open the catalog to page 1

Metrology gauge heads Accuracy (micron) Force (at zero position) (N) 0.6 Operating temperature Relative humidity ( %) Zero thermal drift (micron/°C) ±0.5 Sensitivity thermal drift Meggitt (Sensorex) Archamps Technopole Meggitt Sensing Systems Our measurement product competencies: _ ™^ _ „A Annin^Arinn f n r LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I zt MEMS sensors I Servo-inclinometer I Conditioners extreme f

Open the catalog to page 2

Aerospace Energy Measurement Railway Metrology gauge heads SX8MM Contact Selection guide Electrical stroke (mm) Product reference Meggitt (Sensorex) Archamps Technopôle 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Condition

Open the catalog to page 3

Metrology gauge head - SX8MM series

Metrology gauge head - SX8MM series

Catalog excerpts

All SENSOREX MEGGITT catalogs and technical brochures