*mydirectindustry

Catalogs
SENSOREX MEGGITT
LVDT for servo-valves SX12V series

LVDT for servo-valves SX12V series

Product catalog summary

Overview: Meggitt Sensing Systems specializes in various measurement products including LVDTs, inertial systems, inclinometers, accelerometers, IMUs, MEMS sensors, servo-inclinometers, and conditioners. These products are applicable in sectors such as aerospace, energy, measurement, and railway.

Product Focus - SX12V Sensor: The SX12V is an LVDT designed for servo-actuator pressure chambers, capable of withstanding static pressures up to 350 bar. It features a threaded end for fixation and zero mechanical adjustment, and is available with either a 6-pin connector or a PTFE cable output.

Specifications:

Core: Glued and crimped, made of blackened XC10 steel.
Housing: Diameter 12 steel (Fe-Ni 50), pressure-proof with an O-ring.
Operating Temperature: -40°C to +100°C, up to 125°C for 500 hours, and 150°C with HP option.
Vibration Resistance: 12g peak to peak up to 2kHz.
Shock Resistance: 1000g for 5ms.
Protection: IP 65.

Electrical Specifications:

Electrical Stroke: Ranges from ±12.5mm to ±150mm.
Primary Sine Excitation: 2.2Vrms nominal.
Excitation Frequency: 3500 Hz nominal.
Non-linearity: Less than ±0.3% of full scale.
Zero Null Voltage: ≤0.5% of full scale.

Selection Guide: The SX12V is available in standard and HP versions, with various electrical stroke options and cable lengths. Specific product references are provided for each configuration.

Contact Information: Meggitt (Sensorex) is located at Archamps Technopôle, 196 Rue Louis Rustin, 74166 ARCHAMPS, France. Contact via phone at 04 50 95 43 70 or fax at 04 50 95 43 75. More information can be found on their websites: www.sensorex.fr and www.meggitt.com.

Catalog excerpts

Aerospace Energy Measurement Railway LVDT for servo-actuators SX12V Characteristics  Core glued and crimped  Connector or PTFE cable output  Threaded end and zero mechanical setting  Pressure proof by O ring on diameter 12 housing  Diameter 12 steel housing (Fe-Ni 50), core in blackened XC10 steel Applications Meggitt (Sensorex) SX12V sensor is specially designed for servo-actuator’s pressure chamber. It can resist to a static pressure of 350 bar. It has a threaded end, necessary for its fixation and for the zero mechanical adjustment. This sensor SX12V exists in two versions : - 6 pins connector output - PTFE cable output (4 wires) This sensor is an AC/AC LVDT; it has to be used with a conditioning unit model SX3120, SX9130… All our signal conditioners are detailed in chapter “electronic conditioners”. Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners

Open the catalog to page 1

Fhhe femelle JAEGER (female ptua JAEGER) \ Embase JAEGEF (Socket JAEGER) . Ectou farase 5.5 / plats (] i \ Cable FTFE 4 conducteuns AWQ 26 Ifl - jrn Sensors dimensions Electrical stroke Core rods dimensions Electrical stroke Meggitt (Sensorex) Archamps Technopole Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners extreme environ

Open the catalog to page 2

Environmental characteristics Operating temperature Static pressure -40°C to +100°C (125°C during 500 h) and 150°C with HP option Meggitt (Sensorex) Archamps Technopole Electrical stroke Primary sine excitation 2.2Vrms nominal (6V peak to peak) Excitation frequency Zero null voltage Sensitivity thermal drift Dielectric strength Insulation resistance Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners extreme enviro

Open the catalog to page 3

Aerospace Energy Measurement Railway LVDT for servo-actuators SX12V Contact Standard versions - selection guide Electrical stroke Connector output HP versions – selection guide Electrical stroke Connector output Options Designation Product reference Special core rod thread length : 7mm SX12VxxHP Jaeger female plug SX12Vxx Jaeger female plug Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners Meggitt (Sensorex) Archamps Technopôle 196 Rue Louis Rustin 74166 ARCHAMPS- France...

Open the catalog to page 4

LVDT for servo-valves SX12V series

LVDT for servo-valves SX12V series

Catalog excerpts

All SENSOREX MEGGITT catalogs and technical brochures