Aerospace Energy Measurement Railway Submersible servo-accelerometer (Z) SX41170 ATEX Utilization range  Electrical : Power supply: 19 VDC to 30 VDC with a 350Ω max. load  Protection index: This servo-inclinometer has an IP 68 protection index  Temperature : Operating temperature: -40°C/+85°C Storage temperature: -55°C/ +85°C This single axis servo-accelerometer is designed to be used in vertical position; the gravity acceleration is compensated. The 4-20mA current output is proportional to the acceleration. This servo-accelerometer is particularly appropriate for hard environment applications. Its floated sensitive element allows it to withstand against high vibration and shock levels. Its mechanical design allows it to resist to 100 bar external pressure. Besides, its electronic circuit is designed to be insensitive to electro-magnetic perturbations. This servo-inclinometer can be used : - In surface industries - In permanent presence of gaseous explosive atmosphere - With the gas listed in subdivisions IIA, IIB, IIC Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners Applications  Vertical acceleration measurement  Crane-ship turret

Aerospace Energy Measurement Railway Submersible servo-accelerometer (Z) SX41170 ATEX Contact General specifications at +25°C Power supply 19V to 30V (350 ohms max. load on current output) Meggitt (Sensorex) ≤ 30mA (except current output) Output signal Zero null voltage Output impedance Cross axis sensitivity Housing sensitive axis alignment Zero thermal drift Sensitivity thermal drift Note: this servo-accelerometer must be associated to intrinsically safe devices and these combinations must be compatible as regards intrinsic safety rules. Selection guide Range (*) Product reference Marking details...