Aerospace Energy Measurement Railway Twin axis submersible servo-inclinometer SX41600 ATEX & IECEx Utilization range  Electrical: 24VDC ±4VDC power supply with a 350Ω max. load on the current output  Protection index: This servo-inclinometer has an IP 67 protection index  Temperature : Operating temperature: -40°C/ +85°C Storage temperature: -55°C/ +85°C Applications (IS) SX41600 twin axis submersible servo-inclinometer technology is identical to the one of SX41200 servo-inclinometer. It is a continuous power supply inclinometer, with a 4-20mA analog output, proportional to the sine of inclination. Measurement range is the same on both axis. This servo-inclinometer is particularly appropriate for hard environment applications. Its floated sensitive element allows it to withstand against high vibration and shock levels. Besides, its electronic circuit is designed to be insensitive to electro-magnetic perturbations. It has a rugged 904L stainless steel box, a submersible connector, and is delivered with a male plug and 2 meter cable. This servo-inclinometer can be used : - In surface industries - In permanent presence of gaseous (zone 0) or dusty (zone 20) explosive atmosphere - With the gas listed in subdivisions IIA, IIB or IIC Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners  LNG ship pitch and roll measurements  Offshore platform stabilization  Gas tur

Aerospace Energy Measurement Railway Twin axis submersible servo-inclinometer SX41600 ATEX & IECEx Contact General specifications at +25°C Power supply 24Vdc ±4Vdc -50 mA max (except current output) Output signal Output impedance Zero null voltage Cross axis sensitivity Housing sensitive axis alignment Zero thermal drift Sensitivity thermal drift Meggitt (Sensorex) Archamps Technopôle 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Note: (IS) SX41600 servo-inclinometer must be associated to intrinsically safe devices and these...