Catalog excerpts
RVDT sensor Utilization range The mechanical loads applied to the axis must not exceed Meggitt (Sensorex) (IS) SX36RV provides a sinusoidal signal, with a linear voltage over the measurement range. The primary is excited by an AC voltage, and is picked up by the secondary winding on the transformer principle; the position of the rotating core determines the transformer ratio of each secondary winding. As the secondaries are wound in opposition, the difference between the secondary outputs is proportional to the core angle, relative to the housing. The zero position is where each secondary voltage is equal and opposite. This is determinate in factory, and the position marked on both spindle and housing. • Valve position measurement • Steam turbine servo-valve A rotary displacement sensor is free to make a full rotation, however, in practice, it is only usually used up to ±45°, where the linearity is within 0.5% of full scale. This linearity improves as the range decreases, typically 0.1% for a range of ±5°. This series works with an AC/AC mode, and the signal can be treated with the Meggitt (Sensorex) 690 210 266 signal conditioner. The sensor is made from a light anodized alloy. Output is given through a 20 meter ETFE isolated cable with gauge 26 copper wires. - In permanent presence of gaseous explosive atmosphere (zone 1) (for a zone 0 - With the gas listed in subdivisions MB, IIC (*) the RVDT external housing includes aluminum; it shall be protected against any impact Meggitt Sensing Systems Our measurement product competencies: - ™, Anninnnrinn f rt r LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I zt MEMS sensors I Servo-inclinometer I Conditioners extreme f=> l~l VI TO PI ITI e
Open the catalog to page 1Aerospace Energy Measurement Railway RVDT sensor SX36RV SI Contact General specifications at +25°C Stroke (°) Sensitivity (mV/V/°) Zero null voltage (mVrms max) Meggitt (Sensorex) www.sensorex.fr www.meggitt.com Note: Sensor primary and secondary must be associated to intrinsically safe devices, and these associations must be compatible as regards intrinsic safety rules. Selection guide Stroke Product reference Marking details Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer |...
Open the catalog to page 2All SENSOREX MEGGITT catalogs and technical brochures
-
SX20MExR
4 Pages
-
IMU VRU SX43045
2 Pages
-
(IS) SX41170 series
2 Pages
-
(IS) SX36RV120 series
2 Pages
-
(IS) SX12K series
5 Pages
-
Servo-accelerometer SX41800
2 Pages
-
Robust LVDT CER series
3 Pages
-
Ac/Ac LVDT SX12K/W series
5 Pages
-
Product summary
6 Pages
-
Rugged LVDT- CER series
3 Pages
-
AC/AC LVDT SX12C/K/W series
5 Pages
-
DC/DC LVDT SX20MER series
4 Pages
-
Accelerometer SX41800 series
2 Pages
-
LVDT conditioner SX3120
2 Pages
-
690210266 ATEX conditioner
2 Pages
-
690210279 ATEX conditioner
2 Pages
-
(IS) SX41600 series
2 Pages
-
SX41100 series
2 Pages
-
New MEMS based inclinometer
2 Pages
-
REDS - Smart Sensor
4 Pages