Aerospace Energy Measurement Railway High performance MEMS accelerometer, single & twin axis Model SX40000 Characteristics  Range: ±0.1g, ±0.25g, ±0.5g, ±1g  USB 2.0, 2 wires RS485 Modbus RTU, 4-20mA  Specially designed for severe environments (shocks, vibrations, electromagnetic perturbations)  Very long term stability  High performances  Conform to: EMI 50121-3-2 V2006/ EN 61326-1 V2013 Applications Meggitt (Sensorex) selected the best MEMS cells available on the market and associated them to the digital signal compensation and processing stage to obtain an accelerometer that matches the key performances of servo-accelerometers, at an optimized cost. - Maximum non linearity: <0.05% de PE Resolution < 0.01mg Operating temperature -40°C/+85°C Power supply can span from +4.5 to +30VDC. This unit is available in different ranges, ±0.1g, ±0.25g, ±0.5g & ±1g. Signals (directly proportional to the acceleration) are made available to the end-user as 420mA, RS485 and USB outputs. Specifically designed to operate in stringent vibratory environments, one of the key parameters of our MEMS accelerometer is its adjustable bandwidth between 0.01Hz and 10Hz (thanks to a configurable digital filter). A complete auto test is automatically made at the start of the sensor and results are transmitted to the digital outputs and to the TOR BIT-OUT output. Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners  Linear acceleration/ deceleration measurements  Automatic train position control (ATC, ATP, ERTMS)  Low frequency vibration measure

Aerospace Energy Measurement Railway High performance MEMS accelerometer, single & twin axis Model SX40000 Contact Mechanical characteristics Dimensions Housing material Anodized aluminium Product identification Sensitive axis alignment with respect to enclosure Meggitt (Sensorex) Archamps Technopôle 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Electrical characteristics Power supply < 60mA (single axis) & < 100mA (twin axis) Output signals Signal output Range Initial bias calibration error < ±0.02mg (digital output) & <±0.04mg...