Aerospace Energy Measurement Railway Rugged LVDT with guide & swivel joints CER (integration of SX12K SI) Utilization range  Electrical : Power supply: 2.2Vrms ±20% / 3500Hz ±10%  Pressure : The maximum static pressure is 250 bar  Operating and storage temperatures: -25°C / +125°C for standard version -40°C / +200°C for HT version CER sensors, which can be used in explosive atmosphere, associate an (IS) SX12K sensor with a sealed housing and a shaft bearing. The device can be fixed with a ball and socket joint. These CER sensors have a 5 meter or 10 meter cable output. They are AC/AC sensors; they should be connected to intrinsically safe signal conditioner reference 690 210 279. They can be used : - In surface industries - In permanent presence of gaseous or dusty explosive atmosphere - With the gas listed in subdivisions IIA, IIB, IIC Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners Applications  Valve position measurement  Servo-actuator position feedback  Fire system remote control  Steam turbine servo-valve control  Vapoc

Aerospace Energy Measurement Railway Rugged LVDT with guide & swivel joints CER (integration of SX12K SI) General specifications at +25°C Integrating (IS) SX12K sensors, CER sensors have the same general specification at 25°C. So, refer to the (IS) SX12K general specifications and marking details. Meggitt (Sensorex) Selection guide Stroke (mm) Product reference Meggitt Sensing Systems Our measurement product competencies: LVDTs | Inertial systems | Inclinometers | Accelerometers | IMU | MEMS sensors | Servo-inclinometer | Conditioners