- Catalogs
- SENSONICS LTD
- Sentry G3 Power Supply Module
Sentry G3 Power Supply Module
Sentry G3 Power Supply Module
- AC Input Power Supply: 90VAC to 264VAC, 47Hz to 63Hz, with 3.15A fused anti-surge protection and 30A inrush current at 264VAC.
- DC Input Power Supply: 66VDC to 154VDC, with 5.0A fused protection.
- Voltage Output: +24V on the G3 rack power bus with ±1% accuracy.
- Current Output: 10.0A max for AC input (250W) and 8.3A max for DC input (200W).
- Voltage Ripple/Noise: 1% peak-to-peak.
- Hold Up Time: 60ms typical.
- Safety Approval: EN60950.
- Short Circuit Current: 12.1A at 250mV.
- Universal input range (90VAC to 264VAC, 50Hz/60Hz).
- Optional 110VDC input.
- Capable of powering up to 6 modules.
- Hot swappable and dual redundant configurable.
- Includes an alarm integrity relay.
- Operating Temperature: -30°C to +65°C.
- Storage Temperature: -30°C to +85°C.
- Dimensions: Height 128.8mm (3U), Width 30.0mm (6HP), Depth 220mm.
- Mass: 0.6kg.
Catalog excerpts
TECHNICAL INFORMATION PREDICTIVE MAINTENANCE SYSTEMS Power Supply Module * 90VAC to 264VAC 50Hz/60Hz UNIVERSAL INPUT * 110VDC OPTIONAL INPUT * SUITABLE TO POWER UP TO 6 MODULES * HOT SWAPPABLE * DUAL REDUNDANT CONFIGURABLE * ALARM INTEGRITY RELAY The Sensonics G3-PSU Power Supply Module is for use with the Sentry G3 range of API670 protection monitors and rack equipment. Suitable for both single and dual redundant power supply configurations the module is available for both AC and DC applications. The AC module provides a universal wide range input to cover most applications through a built in auto ranging facility. The units fit in two available slots on the right hand side of the Sentry G3 rack specifically designed for the PSU modules. Note:- The Sentry G3 system operates on a +24V power bus system and therefore does not require a power supply module fitted for this application voltage. Specification AC Input Power Supply : Frequency : Input Protection : In Rush Current: DC Input Power Supply : Input Protection : Voltage Output : Voltage Accuracy : Current Output : +24V on to G3 rack power bus ± 1% 10.0A max +24V (250W AC input) 8.3A max +24V (200W DC input) 1% pk-pk 60ms typ EN60950 12.1A @ 250mV Voltage Ripple / Noise : Hold Up time: Safety Approval: Short Circuit Current: Relay : Lamp:- Power Supply Integrity SPST configuration (250VAC / 1A) Front Panel OK led (GREEN / OFF) Operating Temperature : Storage Temperature : Height : Width : Depth: Mass: Sensonics Ltd Northbridge Road Berkhamsted Herts, HP4 1EF United Kingdom Tel: +44 (0)1442 876833 Fax: +44 (0)1442 876477 www.sensonics
Open the catalog to page 1All SENSONICS LTD catalogs and technical brochures
Aegis3 Pages
- Proximity switch
- Acceleration sensor
- Cylindrical proximity sensor
- Position transducer
- Piezoelectric accelerometer
- Linear position transmitter
- Displacement transducer
- Single-axis accelerometer
- IEPE accelerometer
- DC proximity sensor
- Linear displacement sensor
- Analog position transducer
- Triaxial acceleration sensor
- Real-time monitoring module
- No-contact position sensor
- Measurement monitoring module
- Data acquisition unit
- Signal conditioner
- Temperature monitoring module
- Stainless steel proximity sensor