Catalogs >
Sensirion >
Liquid Flow Sensor LPG10

Liquid Flow Sensor LPG10
5Pages

Catalog excerpts

LPG10-1000 Liquid Flow Sensor digital output (l2C) Digital Planar Package Sensor ■ Ultra small size ■ Excellent repeatability ■ Bio-compatible & inert materials ■ Calibrated and temperature compensated Product Summary Unique CMOSens® planar packaging technology enables non-invasive measurement of liquid flow inside a cost-effective planar form factor. The flow channel passes through the planar substrate and is connected to fluidic channels via a manifold. The fluid is only in contact with the glass channel. The digital microsensor chip provides the full signal processing functionality for a fully calibrated, temperature-compensated digital output. Integration of the LPG10-1000 Liquid Flow Sensor Due to the dramatically reduced size and downmount fluidic connections, the LPG10-1000 allows an outstandingly compact mechanical, fluidic, and electronic integration. To receive support and acceleration on initial testing, please contact Sensirion about existing integration solutions. 1 Sensor Performance Table 1: Performance of LPG10-1000 (all data for medium H2O, 23 °C, 1 barabS unless otherwise noted) aFlow rate at which the sensor output saturates, see section 2 for performance specifications between full scale and saturation point bFlow path empty 'Pressures listed are mechanical limits of the glass substrate; Burst pressure of manifold assembly depends on actual manifold seal design. www.sensirion.com Version 3 - January 2017 1/5

Open the catalog to page 1

LPG10-1000 Liquid Flow Sensor 2 Specifications Chart Flow rate (pl/min H2O) Figure 2: Sensor accuracy and repeatability (pl/min) across the sensor's flow range 3 Communication with the Sensor The OEM flow sensor LPG10-1000 shows bidirectional, linear transfer characteristics. The product comes fully calibrated for water. Digital sampling time, 16 bit 74 ms Digital sampling time, 9 bit 1 ms The electrical connection to the LPG10-1000 flow sensor is illustrated in the schematic drawing shown in section 3.2. The electrical connection to the pads can be realized in different ways, e.g....

Open the catalog to page 2

LPG10-1000 Liquid Flow Sensor 4 Fluidic Connection Table 4: Fluidic Specifications and Pressure Rating www.sensirion.com Version 3 - January 2017 3/5

Open the catalog to page 3

LPG10-1000 Liquid Flow Sensor 6 Ordering Information Standard shipment includes only the sensor, neither cables nor fluidic connection material. For easy testing, an Evaluation Kit is available. The kit contains: An LPG10-1000 sensor, preassembled in a fluidic manifold (PMMA), featuring % -28 flat bottom fluidic fittings. The fluidic seal between sensor and manifold is ensured using two O-Rings (FPM). The included connector cap secures the sensor to the manifold and features a 4-pin Molex connector. The included Molex adapter cable, USB-cable and software allow for easy evaluation using a...

Open the catalog to page 4

LPG10-1000 Liquid Flow Sensor SG NS IRION TH6 SENSOR COMPANY Warning, personal injury Do not use this product as safety or emergency stop devices or in any other application where failure of the product could result in personal injury (including death). Do not use this product for applications other than its intended and authorized use. Before installing, handling, using or servicing this product, please consult the datasheet and application notes. Failure to comply with these instructions could result in death or serious injury. If the Buyer shall purchase or use SENSIRION products for...

Open the catalog to page 5

Liquid Flow Sensor LPG10 5Pages

Catalog excerpts

All Sensirion catalogs and technical brochures

Liquid Flow Sensor LPG10
5Pages