800/810 Analog
8Pages

{{requestButtons}}

Catalog excerpts

800/810 Analog - 1

Datasheet SDP8xx-Analog Differential Pressure Sensor with Analog Output ■ Configurable analog output ■ Calibrated and temperature compensated ■ Excellent repeatability, no drift Product Summary The SDP800 sensor family is Sensirion's series of differential pressure sensors designed for high-volume applications. The sensors measure the pressure of air and non-aggressive gases with superb accuracy and no offset drift. The sensors cover a pressure range of up to ±500 Pa (±2 inch H2O / ±5 mbar) and deliver outstanding accuracy, also at the lower end of the measuring range. The SDP800 features an analog ratiometric voltage output, which is configurable to linear or square root by a separate pin. The outstanding performance of these sensors is based on Sensirion's patented CMOSens® sensor technology, which combines the sensor element, signal processing, digital calibration and analog output on a small CMOS chip. The differential pressure is measured by a thermal sensor element using flow-through technology. The well-proven CMOS technology is perfectly suited for high-quality mass production and is the ideal choice for demanding and cost-sensitive OEM applications. Benefits of Sensirion’s CMOSens® Technology ■ High reliability and long-term stability ■ Best signal to noise ratio ■ Industry-proven technology with a track record of more than 15 years ■ Designed for mass production ■ High process capability

Open the catalog to page 1
800/810 Analog - 2

1. Sensor Performance1.1 Differential Pressure Specification1 Parameter Unless otherwise noted, all sensor specifications are valid at 25°C with VDD = 3.3 V and absolute pressure = 966 mbar. For other pressure ranges contact Sensirion Output voltage integral non linearity and output voltage noise are not included. Note that the effect of output voltage integral non linearity and output voltage noise on accuracy is highly dependent on the output configuration (linear or square root). Includes repeatability Total accuracy/repeatability is a sum of zero-point and span accuracy/repeatability....

Open the catalog to page 2
800/810 Analog - 3

2. Specifications 2.1 Electrical Specifications For a resistive load to GND less than 100kOhm a 1 nF capacitor to GND on the AOUT is recommended For Air and N2. Long term exposure to (high concentrations of) O2 at high temperatures can reduce the product lifetime

Open the catalog to page 3
800/810 Analog - 4

3. Pin Assignment The pin assignments of the SDP8xx-Analog can be found in Table 1. Pin no. Output curve selection input Ratiometric analog voltage output Table 1: SDP8xx-Analog pin assignment (bottom view) OCS: Output Curve Selection Input Config. Polarity Description Conversion to physical values AOut[V], VDD[V], Differential Pressure (DP) [Pa] Analog output is configured as a linear output. The sensor is not fully bidirectional in this configuration: -10% full500Pa scale to 100% full scale. Linear Analog output is a fully bi-directional output with square root conversion. The benefits...

Open the catalog to page 4
800/810 Analog - 5

Dimensions SDP80x – Manifold Connection Dimensions SDP81x – Tube Connection Figure 2: SDP81x. All dimensions in mm. www.sensirion.com

Open the catalog to page 5
800/810 Analog - 6

Figure 3: Footprint for PCB mounting (top view = sensor side). All dimensions in mm. A: Overall sensor dimensions B: Holes for additional mounting screws (optional) In case the sensor is not mounted on a PCB and is connected with a cable the SDP800 series cap is recommended. 5. Soldering Standard wave soldering systems may be used for soldering SDP800 series sensors. Reflow soldering is not feasible and may damage the sensor. The sensor ports must be protected from solder splash and flux during soldering. Figure 4 shows an appropriate temperature profile with maximum temperature values....

Open the catalog to page 6
800/810 Analog - 7

6. Shipping Package SDP8xx are shipped in trays of 80pcs. The tray dimension is 355mm x 255mm x 21.5mm. By piling them up, the height per tray can be considered as 19mm. 7. Ordering Information Use the part names and item numbers shown in the following table when ordering SDP8xx differential pressure sensor. For the latest product information and local distributors, visit www.sensirion.com.

Open the catalog to page 7
800/810 Analog - 8

Important Notices Warning, personal injury Do not use this product as safety or emergency stop devices or in any other application where failure of the product could result in personal injury (including death). Do not use this product for applications other than its intended and authorized use. Before installing, handling, using or servicing this product, please consult the datasheet and application notes. Failure to comply with these instructions could result in death or serious injury. If the Buyer shall purchase or use SENSIRION products for any unintended or unauthorized application,...

Open the catalog to page 8

All Sensirion catalogs and technical brochures

  1. STS3x-DIS

    18 Pages

  2. Liquid Flow

    5 Pages

  3. Antifogging

    2 Pages

  4. SHTW2

    14 Pages

  5. LS32-1500

    4 Pages

  6. SHT20

    14 Pages