CSG110
4Pages

General purpose 35mm DIN rail amplifier module, DC powered, universal strain gauge signal conditioner NOTABLE FEATURES • 1 kHz, 10 kHz, and 25 kHz bandwidth available • DIP switches for easy setting adjustments • Overvoltage protection • Reduced noise from 100 mV to 15 mV (85% improvement from previous model) SPECIFICATIONS • Bipolar Output, Differential Input • ±5 or ± 10 VDC Outputs DIP Switch Selectable Output, Unipolar Bidirectional Voltage (0-5-10 VDC) also available • 0–20 mA, 4–20 mA, 0–16 mA, 5–25 mA DIP Switch Selectable Output, Bidirectional Current (4-12-20 mA) also available • Bridge Excitation Selectable 5 or 10 VDC • Ranges: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 10.0 mV/V (DIP Switch Selectable) • Interchangeable Socket Mounted 60.4K Shunt Cal • Externally Accessible Shunt Cal Activation Button • Externally Accessible Span and Offset adjustments resistor locations • Sensor Polarity Reversal DIP Switch • Weight: 1.6 oz (45 g) Sensor Solution Source FUTEK’s newly improved CSG110 Strain Gauge Amplifier is an In-Line instrument tooled for any full-bridge strain gauged sensor with a mV/V output. The CSG110 Amplifier provides a VDC and/or Current output via its built-in regulated bridge excitation source. With several models available, users are sure to find an amplifier matching their specific requirements whether it calls for a bandwidth of 1kHz, 10kHz or 25 kHz. FUTEK even manufactures an OEM version (FSH01447, FSH01450) of this model. The CSG110 is both designed and manufactured in the USA Broadened Bandwidth FUTEK has now broadened the bandwidth of their CSG110 by adding a 10kHz and 25kHz version of the model to their repertoire. This allows the amplifier to cover a greater scale of applications, making the CSG110 the perfect one-stop-shop for your amplification needs Multiple Outputs Unlike many amplifiers, FUTEK’s CSG110 provides the user with multiple output variations giving the user the option to adjust the output per their application’s requirements. The unit’s output options are: ±5 VDC, ±10 VDC, 0-20 mA, 4-20 mA, 0-16 mA, 5-25 mA, with zero offset versions available upon request. Load • Torque • Pressure • Multi

MALE DB9 POWER SIDE FEMALE DB9 SENSOR SIDE POWER SUPPLY WIRING CODE CABLE COLOR CODE WIRING CODE For 6 wire sensor connect +SENSE to +EXCITATION and –SENSE to –EXCITATION or Ground Only available with current output option Current Switches Shunt Button Span Potentiometer Zero Potentiometer Bandwidth Switch Excitation Switches Polarity Switch Gain Switch

Adjusting zero will not affect calibration Adjusting span will affect calibration Power supply must source 150 mA minimum Carefully remove cover to access DIP switches

FUTEK Model CSG110 4RELATED ACCESSORIES The following accessories are readily available with our CSG110 Strain Gauge Amplifier. Please visit www.futek.com for full details on these items. DB9 MALE WITH HOUSING (INCLUDED) Item Number: FSH01075 YELLOW MOLDED BOOT (INCLUDED) Item Number: FSH03219 DB9 Female, Yellow Molded Boot, to 26 Awg 6 Conductor Poly Cable, 5 ft Long, CSG110 Power Side SCREW TERMINAL (FEMALE) Item Number: FSH02237 IAC150, Screw Terminal to DB9 Board, DB9 Female, Standard, Power/Output Side of CSG110 SCREW TERMINAL (MALE) Item Number: FSH02236 IAC150, Screw Terminal to...