- Catalogs
- SENSE-WARE
- UV-185/5
UV-185/5
UV-185/5
- UV Sensor with corrosion-proof GRP housing.
- Non-incendive for Zone 2 and weather-resistant.
- Relay and 4-20 mA outputs with automatic and manual self-test capabilities.
- 5-year warranty with ATEX, IECEx, and FM3611 approvals.
- EN54-10 and FM3260 approved, suitable for Zone 2 and Safe Areas.
- Spectral Range: 185 - 260 nm.
- Maximum Range: 23 meters (75 ft) for a 0.09 m2 heptane pan fire.
- Typical Response: Less than 10 seconds.
- Field of View: 90º x 90º.
- Input Power: 10-28 VDC, with normal current at 25 mA @ 24 VDC.
- Alarm Current: ± 35 mA @ 24 VDC.
- Start-Up Time: Less than 10 seconds.
- Analogue Signal: 0-20 mA with specific signals for power fault, optical fault, normal operation, and alarm.
- Relays: Alarm & Fault SPDT with a contact rating of 30 VDC / 2 A / 60 W.
- LED Indicators: Green for normal operation, red for alarm, and yellow for fault.
- Automatic Self-Test: Conducted once per hour.
- Manual Self-Test: Available as per the manual.
- Ingress Protection: IP65 with pressure compensation element (PCE).
- Temperature Range: -25 °C to +70 °C for hazardous areas, -40 °C to +70 °C for safe areas.
- Humidity: 0-95% non-condensing.
- Weight: 465 g, Dimensions: 125 x 80 x 57 mm.
- North & South America: Sense-WARE Americas, Peoria, IL, USA. Phone: +1 888 732 7521, Email: [email protected]
- Europe, Middle East & Africa: Sense-WARE Fire and Gas Detection B.V, Veenendaal, The Netherlands. Phone: +31 88 736 7300, Email: [email protected]
- Asia & Oceania: Sense-WARE Asia Pacific, New Taipei City, Taiwan. Phone: +886 2 862 628 93, Email: [email protected]
Catalog excerpts
Model UV-185/5 UV Flame Detector ● UV Sensor ● Corrosion proof GRP housing ● Non-Incendive for Zone 2 ● Weather Resistant ● Relay & 4-20 mA Outputs ● Automatic & Manual Self Test ● 5 Year Warranty The Sense-WARE UV Flame Detector is designed Area indoor flame detection. Designed to detect all immune to false alarms, the Model UV-185/5 offers industrial and commercial applications. to give optimum performance for Zone 2 and Safe types of hydrocarbon fires and Hydrogen fires and a cost effective solution for Zone 2 and Safe Area FM3611 Approved Approved Safe Areas The Retroreflective ring around the window allows for easy testing with a Sense-Ware Test Lamp. The Pressure Compensating Element (PCE), prevents water ingress damaging the electronics. Sense-WARE Flame Detectors offer fast performance, with a 5 year warranty making them the Best in Class. Typical Applications ● Battery Storage Rooms ● Clean Rooms ● Cold Storages ● Engine Test Cells ● Fume Hoods ● Gas Cabinets ● Gasoline / Gas Engine Rooms ● Heating Rooms for Chemicals ● Indoor Chemical Storage ● Indoor Chemical, Fuel & Solvent Storage ● Indoor Hydrocarbon Storage and Processing ● Indoor Hydrogen Storage and Processing ● Radio Amplifier Rooms / Isolators for Ante
Open the catalog to page 1
Specifications Spectral Range 185 - 260 nm Maximum Range 23 Meters (75 ft) 0.09 m2 (1 Sq.Ft.) Heptane pan fire Typical Response <10 Seconds Field of View 90º x 90º Input Power 10-28 VDC Current (Normal) 25 mA @ 24 VDC (75 mA peak during Self-Test) Current (Alarm) ± 35 mA @ 24 VDC Start Up Time <10 Seconds Analogue Signal - Sink 0-20 mA Power Fault 0 mA Optical Fault 2 mA Normal Operation 4 mA Automatic Self-Test Once per Hour Manual Self-Test Available (see Manual) Approvals EN54-10 Performance, Class 2 Cable gland (pre-mounted) 1 x M20 ATEX, IEC Hazardous Area II 3G Ex nA IIC T4 Gc, II 3D EX...
Open the catalog to page 2