M2 SERIES THERMOSTATS
6Pages

{{requestButtons}}

Catalog excerpts

M2 SERIES THERMOSTATS - 1

:* * :s* Sensata Technologies | M2 SERIES THERMOSTATS 0°F to 240°F, Narrow Differential, Hermetically Sealed V2” Introduction The Klixon® M2 thermostat is constructed with a snap-acting bimetal disc that serves as the actuating element. As the temperature reaches a predetermined calibration point, the disc snaps to reverse its curvature, producing the crisp, positive switching action inherent to Klixon® thermostats. This feature assures precision temperature accuracy and long life reliability in any position. The M2 thermostat is engineered to provide reliable, narrow differential switching in the most demanding applications. Prior to final weld, finished assemblies are vacuum baked and back-filled with dry nitrogen. The inert, dry atmosphere eliminates moisture and other volatiles to prevent condensation at low temperatures or possible contact contamination at high temperatures. This back-fill also improves the dielectric characteristics of the device and prevents oxidation of the contacts. The M2 thermostat is the ideal choice where reliable, narrow differential switching is a must. Precision temperature accuracy and long life reliability are achieved through the use of the well known Klixon® snap-acting disc. This unique mechanism multiplies the motion of the temperature sensor and actuates a switch capable of handling high power. Welded closed after accurate calibration, the M2 is tamperproof. Features • Hermetically sealed • Vacuum baked and back-filled with dry nitrogen • Single pole, single throw (SPST) • Normally open or normally closed • Low profile • Narrow differential • Preset, non-adjustable calibration • Long cycle life (250,000 cycles) • Qualified to MIL-S-24236/20 • Qualified to NASA S-311-641/02 Contact Ratings (Resistive) Based on standard differential Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 1
M2 SERIES THERMOSTATS - 2

The standard operating temperatures, differential and tolerances are shown in the table below, but can be customized to meet your specific requirements. CONFIGURATIONS The M2 is available in standard and special configurations. The standard configurations provide options for straight, right angle, and 45° terminals as well as a loose mounting bracket. To order a standard M2 thermostat, please use the "Standard M2 Thermostat Part Number Builder". Special physical constructions of the M2 thermostat are available to provide different mounting options such as a mounting stud, mounting...

Open the catalog to page 2
M2 SERIES THERMOSTATS - 3

CONFIGURATIONS (CONTINUED) Standard M2 Thermostat Configurations Special M2 Thermostat Configurations Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 3
M2 SERIES THERMOSTATS - 4

ORDERING OPTIONS STANDARD M2 THERMOSTAT Part Series Bracket 1 = No Bracket 2 = Loose Bracket Terminal 1 = Straight 2 = 45° 3 = Right angle Operation L = Open on rise F = Close on rise Closing Temperature* Use 3 digits (°F) Plating 2 = Copper-nickel (standard) Contacts 1 = Silver 2 = Gold plated * See temperature table for standards For applications that require thermostat certified to the M24236, customers must order to the M24236/20 part number. For applications that require the thermostat to be certified to NASA S-311-P641/02, customers should contact the factory to ensure the correct...

Open the catalog to page 4
M2 SERIES THERMOSTATS - 5

ORDERING OPTIONS SPECIAL M2 THERMOSTAT Part Series Operation L = Open to temp. rise F = Close on temp. rise Temperature Closing temperature °F Tolerance Closing temperature tolerance (±°F) Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 5
M2 SERIES THERMOSTATS - 6

WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH • Disconnect all power before installing or working with this equipment • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death...

Open the catalog to page 6

All Sensata Technologies catalogs and technical brochures

  1. CL SERIES

    5 Pages

  2. 656T SERIES

    3 Pages

  3. 613 SERIES

    4 Pages

  4. 2TC SERIES

    3 Pages

Archived catalogs