CL SERIES
5Pages

{{requestButtons}}

Catalog excerpts

CL SERIES - 1

| CL SERIES PANEL MOUNT • Ratings from 5A to 10A @ 24-280 VAC • Triac Output • LED Status Indicator • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers • AC or DC control • EMC Compliant to Level 3 • Epoxy free design PRODUCT SELECTION Control Voltage Serires CL Load Voltage 240: 24-280 VAC Control Voltage A: 90-250 VAC D: 3-32 VDC Rated Load Current 05: 5 Amps 10: 10 Amps Termination Blank: Screws & clamps K: Installed standoffs with screws for PC Board mounting (IP00 only) (1) Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On Cover Blank: Not Included (IP00) C: Included (IP20) Thermal Pad Blank: Not Included H: Included Copyright © 2018 Sensata Technologies, Inc. Required for valid part number For options only and not required for valid part number Note: Not all part number combinations are available. Contact Crydom Technical support for information on the availability of a specific part

Open the catalog to page 1
CL SERIES - 2

Recommended Wire Sizes Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 2
CL SERIES - 3

EQUIVALENT CIRCUIT BLOCK DIAGRAMS Standard Regulated “DC” Inputs 14 CL Series DC Control Input Current (mA) Trigger Circuit Current Limiter Standar Regulated “AC” Inputs Current Limiter Trigger Circuit MECHANICAL SPECIFICATIONS (2) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Hex Standoff Termination (“K” Option) (1) Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 3
CL SERIES - 4

© ACCESORIES Protective Cover & Hardware Kits Hardware Kit Part number: HK4 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals. Recommended Accessories Copyright © 2018 Sensata Technologies, Inc.

Open the catalog to page 4
CL SERIES - 5

AGENCY APPROVALS AND CERTIFICATIONS EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 GENERAL NOTES (1) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm). (2) All parameters at 25°C unless otherwise specified. (3) Output will self trigger between 450-600Vpk, not suituable for capacitive loads. (4) Heat sinking...

Open the catalog to page 5

All Sensata Technologies catalogs and technical brochures

  1. 656T SERIES

    3 Pages

  2. 613 SERIES

    4 Pages

  3. 2TC SERIES

    3 Pages

Archived catalogs