Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. SenRing Electronics.
  3. H1235 Series

H1235 Series

H1235 Series
1 / 1 PageView full catalog

H1235 Series

Product catalog summary
Overview: The H1235 series is a standard precise slip ring with an integrated structure design. It features a through hole of 12mm and an outer diameter of 35mm, suitable for rotating applications requiring a through hole of up to 35mm. An inner bushing can be added for holes smaller than 7mm.
Specifications:
  • Part Numbers and Lengths: Models include H1235-0205, H1235-0305, H1235-0405, H1235-0605, H1235-0805, H1235-1005, and H1235-1205, with lengths ranging from 25mm to 36.4mm.
  • Circuits: Circuits can be combined in parallel to increase current capacity, e.g., two circuits of 2A can be combined for 4A.
  • Product Grades: Available in standard (C), industrial (D), and high quality (H) grades, with maximum rotating speeds of 250RPM, 600RPM, and 1000RPM respectively.
  • Working Life: Ranges from 20 million to 150 million revolutions depending on the grade.
  • Contact Material: Gold alloy for standard, precious metal for industrial and high quality.
Technical Specifications:
  • Operating Temperature: -30°C to 80°C
  • Humidity: 0 to 85% RH
  • Torque: 0.05N.m (+0.02N.m/6 circuits)
  • IP Grade: IP51
  • Rated Voltage: 0 to 240VAC/VDC
  • Insulation Resistance: ≥500MΩ/500VDC
  • Lead Wire Specification: AWG22# Silver-plated Teflon, standard length 300mm (customizable)
  • Dielectric Strength: 500VAC@50Hz, 60s
  • Electrical Noise: <0.01
Contact Information: Senring Electronics, Tel: +86-755-29717812, E-mail: [email protected], Website: www.senring.com
See more

Catalog excerpts

H1235 Series-1

H1235 Series H1235 series standard precise slip ring, integrated structure design, with through hole 12mm , OD35mm , suitable for rotating application which requires a through hole <=35mm ( remark: if need a hole <7mm, can add a inner bushing) H1235 - Signal circuits no. - Eroduct grade Example: C: standard level D:Industrial level H:High quality level H Series Through Hole Slip Ring Standard Model List H1235 series model list *Remark: Circuits can be combined in parallel for bigger current, N circuits of 2A to get N*2A, such as 2 circuits of 2A in parallel for 4A use. Technical Specification Product Grade Table Grade code All rights reserved © Senring Electronics Tel: +86-755-29717812 E-mail:[email protected] website: www.senring.com

 Open the catalog to page 1

All SenRing Electronics. catalogs and technical brochures

  1. H60130
    H60130

    2  Pages

  2. H80158 Series
    H80158 Series

    2  Pages

  3. EH2586-01 series 1 channel Gigabit Ethernet rotary joint
    EH2586-01 series 1 channel Gigabit Ethernet rotary joint

    2  Pages

  4. 3001015 Series 1-Passages Rotary Unions
    3001015 Series 1-Passages Rotary Unions

    2  Pages

  5. H0317 Series
    H0317 Series

    1  Page

  6. M065 Series Capsule Slip Ring
    M065 Series Capsule Slip Ring

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.