Brass Brazing Classifications: Standard Identification Characteristics: Senor SMF G50 is a powder type flux for braze welding /brazing of copper alloys, carbides, carbon & galvanized steels. This is useful for torch, induction or furnace heat brazing. Also used when brazing with low fuming bronze, nickel bronze and brass brazing alloy. Residues can be easily removed. This gives high fluxing activity with good wetting and spread and gives nice visibility while brazing. (no sodium glare). Automobile Industries Cycle manufacturing Home Appliances Furniture Industries, Tools manufacturing Properties: Activity range Activity Fluidity Flux residues Capillary Life 750˚c - 1150˚c Good Good Non corrosive Medium High Flux Removal : To obtain best results wire brush with hot water (60˚c) or dip in hot diluted caustic soda.

General Instruction Remove oil, grease or other contaminates from the surface to be brazed / weld. Keep away from heat, moisture and water. These fluxes are hygroscopic in nature. Return flux to sealed container to prevent Caking. These fluxes are mild chemicals, ensure proper hygiene care. Note On Usage: 1. The Flux may be used in Powder form or mixed with water to make paste. In case of paste form the flux may be used as supplied or diluted. 2. Heat the end of the filler metal rod and dip into the flux, or sprinkle the flux on the work piece. In case of paste apply flux to the joint and filler...