Stainless Steel Electrodes (MMAW)

Coating Type Coating Factor Stainless Steel Brand Printed SME 308-16 is a Stainless Steel electrode with controlled Ferrite content of 3 to 7% for maximum resistance to cracking, corrosion and high temperatures up to 800°C. It is suitable for welding performance in all positions and has high resistance to cracking It gives arc stability and low spatter loss. All sizes strike and re-strike easily. The slag is easily controlled and does not interfere with the arc action. Weld beads are smooth, and of good appearance. 1) Welding of 18Cr/8Ni grade Stainless Steels such as AISI types 301, 302, 304...

1) Keep electrode dry (Optionally also available in vacuum-packed condition, redrying not required in this 2) To obtain best results rebake the electrodes at 250 ~ 300°C for 1 hour and keep it at 100 ~ 150°C prior to use. 3) Use stainless steel wire brush for cleaning of slags 4) Follow the recommended welding parameters to achieve good sound welds 5) Do not use excessive currents. Hold short arc. Use good fit-up on joints. Above are basic guidelines and will vary depending on joint design, number of passes and other factors. Protect yourself and others. Read and understand this warning. Do not...