Stainless Steel (Filler Rods & Wires) One Stop Solution for Welding & Brazing Consumables

Availability: Standard Size : 1.6, 2.0, 2.5, 3.2 & 4.0 mm dia in 500/1000 mm length Spools : 0.8, 1.0, 1.2 & 1.6 mm dia in 12.5 Kg spool for MIG Welding.

1) Excessive exposure of electrodes to humid conditions will cause some moisture pick-up and increase the risk of porosity. 2) For electrodes that have been exposed: Redry 200 - 300°C/l-2h to restore to as-packed condition. 3) Welding of pipes require use of purge gas in order to ensure a stainless root face of the weld. 4) Inter-pass temperature should not exceed 150°C, and heat input should not exceed 1.5kJ/mm. Above are basic guidelines and will vary depending on joint design, number of passes and other factors. Awarning© Protect yourself and others. Read and understand this warning. Do not...