300 t 80,3 m Duty Cycle Crane

Technical data, equipment MACHINE TYPE Model (Type) Control system ENGINE Power Direct injection, turbo-charged, charge air cooler Cooling Water cooled Dry filter with pre-separator, automatic dust discharge, main element and safety element, contamination indicator Fuel tank Elect. System UPPERCARRIAGE Design Torsion-resistant box design, precision crafted, bronze bushings for boom bearing arrangement Clear, service-friendly concept, engine installed in the longitudinal direction LED spotlights for optimal illumination of the work area Camera monitoring of the rear area and right side Maritime...

Technical data, equipment ATTACHEMENTS Design Boom adjustment winch Decades of experience and the latest computer simulations guarantee the greatest degree of stability and longest service life. Drive via slant axis hydraulic motor with compact planetary gear, pulling force 2 x 165 kN, rope diameter 26 mm Safety brake Spring-loaded disk brake Positioning speed Rope capacity 1. Layer Options Crane safety Winches Rope winch (rated load) 1. Layer Rope diameter Rope speed 1. Layer Latest generation of load moment monitoring, Display shows all important data, lifting limit switch, pressure relief...

Heavy duty boom Boom configuration - Main boom SH Boom length Lower boom SH Type 2989 Lower boom add-on part SH Type 2989-V Boom insert SH Type 2989 Boom insert conical SH Type 2989 Boom top section T300-HD Auxiliary jib S48 (optional) Technical data and dimensions are subject to ch

Safe working loads excavator SH Parts reeving Notes: 1. The rated loads shown are based on the machine on firm level ground. 2. The rated loads shown are in metric tons valid for 360 degrees swing. 3. The safe working loads do not exceed 75% of the tipping load. 4. The weight of the attachement (Hook, Grapple) has to be deducted from the safe working load. 5. The lifting of a load, which exceeds the max. whinch pulling force of a winch, is only allowed when every single whinch is not overloaded. Winch pulling force [kN] Rope diameter [mm] Min. breaking load [kN] max. safe working loaod in one...

Safe working loads crane SH Notes: 1. The rated loads shown are based on the machine on firm level ground without travelling. 2. The rated loads shown are in metric tons valid for 360 degrees swing. 3. Liftcrane capacities are calculated to comply with ISO 4305 table 1+2 and the tilting angle method (tilting angle 4 deg.) 4. The rated loads shown include the weight of all lifting attachments, such as hook and bucket. 5. The rated loads shown are valid for max. undercarriage track width. 6. The users must derate or limit the lifted loads to allow for adverse conditions such as soft or uneven ground,...

Safe working loads crane SH Notes: 1. The rated loads shown are based on the machine on firm level ground without travelling. 2. The rated loads shown are in metric tons valid for 360 degrees swing. 3. Liftcrane capacities are calculated to comply with ISO 4305 table 1+2 and the tilting angle method (tilting angle 4 deg.) 4. The rated loads shown include the weight of all lifting attachments, such as hook and bucket. 5. The rated loads shown are valid for max. undercarriage track width. 6. The users must derate or limit the lifted loads to allow for adverse conditions such as soft or uneven ground,...

Grab equipment Notes: 1. The specified safe working load values apply for firm and level stance of the machine. 2. The safe working load values are specified in tons (t) and apply for 360 degrees. 3. The safe working loads apply for the maximum outrigger width / undercarriage track width. 4. The specified safe working loads include the grapple weight and do not exceed 66.7% of the tipping load. 5. For operation with a mechanical two-rope grapple, the safe working load is limited by the permissible rope tension or the maximum winch pulling force of a winch. Technical data and dimensions are subject...

Dragline bucket equipment Dredging area: R = Working radius A = max. dredging width = approx. R + 1/3 bis 1/2 (H-K) T = Dredging depth = approx. 40-50% von R H = Height K = Length of dragline bucket Note: 1. The specified safe working load values apply for firm and level stance of the machine. 2. The safe working load values are specified in tons (t) and apply for 360 degrees. 3. The safe working loads apply for the maximum outrigger width / undercarriage track width. 4. The specified safe working load values include the weight of the dragline bucket and do not exceed 75% of the tipping load. 5....

6300 Basic machine with 85 t counter weight 6300 basic machine with 105 t counter weight and 40 t undercarriage counterweight 6300 basic machine with hydraulically elevating cab maXcab E270 (Option) 10 Technical data and dimensions are subject to change.

Transport dimensions and weights 6300 basic machine without lower boom 6300 Basic machine without lower boom, with hydraulically elevating cab maXcab E270 (Option) Technical data and dimensions are subject to change.

Crawler with 1200 mm flat shoes 1200 mm flat shoes 2x (Option 1500 mm flat shoes) 2x Counterweight base plate (only 105 t counterweight) Undercarriage podium (only 85 t counterweight) Lower boom SH 7 m type 2989 incl. fairlead and 6 t winch Boom insert SH 5,6 m type 2989 (with SH pendants) Boom insert SH 11,2 m type 2989 (with SH pendants) Upper boom SH 8,9 m Type 2989 (with SH pendants) = conus SH 7,4 m + Pulley head 1.5 m)

Transport dimensions Hooks For 450 kN winches with 42 mm rope diameter Capacity Rope strands and maximum load rating [kg] For 350 kN winches with 36 mm rope diameter Capacity Rope strands and maximum load rating [kg] Hook blocks for rope diameter 36 mm 2545 Hook blocks for rope diameter 42 mm Hook block Hook block Hook block Hook block Hook block Hook block Hook block Load hook

Self-assembly system

Self-assembly system

SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 10 94315 Straubing, Germany This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines delivered by SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other...