Reduce energy costs, protect the environment with efficient machine designs from SENNEBOGEN

Choose the right system for your application! Your benefits from 5 systems Up to 90 % less emissions Most advanced diesel, hydraulic and control technology Page 4/5 Up to 55 % less energy consumption Energy Recovery System

Up to 50 % lower energy costs Electric machines Up to 30 % more efficiency Electric travel drive Page 18/19 BALANCER Equilibrium Equilibrium technology Page 12/13

SENNEBOGEN Green Efficiency State-of-the-art E-series technology Save much fuel! • Specific fuel consumption reduced by working in EcoMode with reduced engine speed • Minimal fuel consumption in idle mode thanks to automatic lowering of engine speed by 40 % • The engine switches off when not needed: no emissions, no consumption due to automatic stop • Large-scale hydraulic valves and lines for the best efficiency • Extended oil service life enables significantly longer change intervals of 4,000 operating hours • Thermostatically controlled fan drive operates based on the actual needs - 25 % - 90...

Reduce costs by 50 %: modern electro-hydraulic drives • Higher value retention thanks to the long service life of the hydraulic components • Very low operating consts thanks to lower energy costs • Significantly longer maintenance intervals than with diesel engines • Low maintenance costs: Reduction in fuel and oil filters/oil changes • Always ready for use - refueling and fuel storage not required • Very environmentally friendly, completely emissionfree - no exhaust gases • Work in greater comfort thanks to vibration-free drive and very quiet operation • Cleaner engine compartment, even after...

projects ied and tested in countless tr

SENNEBOGEN eGreen: customized electro-projects Find the perfect solution for stationary and more complex mobile applications with SENNEBOGEN. • SENNEBOGEN diesel power packs for convenient electromobility of electric material handlers (available as an external power pack device or as an integrated version) • Different power supplies can be planned depending on specific operating conditions: - Ceiling power supply via bridge crane - Conductor bars - Cable carriers/drag lines - Customized solutions for cable reels, winding cylindrically or spirally Why SENNEBOGEN electric solutions? 50% lower operating...

Ceiling power supply via overhead bridge crane Powerpack at the rear for mobile use without cable power supply

Green Hybrid Energy Recovery System GreenHybrid Save up to 55% energy* • A combination of hydraulic cylinders at the boom and nitrogen piston accumulators with gas recover energy during the work procedure • Use of the recovered energy during the next working cycle reduces the engine power required Safety • Use of standard hydraulic components • Energy storage in the enclosed rear section Nitrogen (Energy storage) The lowering of the boom compresses the gas contained in the nitrogen piston accumulator in the rear of the machine. Control block * depending on the machine type between 35% and 55%...

The benefit of the SENNEBOGEN Green Hybrid system Almost constant power across the entire cylinder work path Power Advantage: Constant lifting power thanks to large system volumes in SENNEBOGEN Green Hybrid system Rapidly declining power in solutions with small system volume (without piston accumulator) Cylinder path Hybrid cylinder retracted Hybrid cylinder extended

The EQ-Balance principle Simple effective BALANCER Equilibrium Work with just 50 % of the installed motor and hydraulic drive power compared with conventional machines thanks to intelligent power distribution. There is no easier way of lowering your operating costs. ibirum Constant equil 1 Working in close range • Counter weight moved towards middle by coupling bar 2 Working in far range • Counter weight moved backwards by coupling bar Center of gravity is always centrally located above the center of the slewing ring minimal energy expenditure smaller engine size and hydraulic components, less...

BALANCER Equilibrium savings potential* Traditional diesel material handler SENNEBOGEN electric engine * compared with diesel powered machine without the balance principle. SENNEBOGEN EQ-Balancer with electric engine

BALANCER Equilibrium Example: Port Concrete base Crawler special Crawler gantry Rail gantry Surface-mounted pontoon

pacity .2 t load ca 5 reach with 25 m Example: Scrap Stationary electrical application in the scrap yard Example: Log handling Logistics concept with rail gantry

BALANCER Equilibrium

BALANCER Equilibrium

Green Efficiency Drive Electric travel drive for log handling Unique! Experience the new efficient and dynamic electric travel drive for Pick & Carry and save up to 30 % on energy costs Drive Brake Electric travel drive Why choose an electric travel drive for log handling? • Integrated power management: intelligent control of energy flows when driving and operating • Lower heat loss compared with hydraulic travel drive • Recuperation of braking energy: low-wear braking action • Dynamic and precise driving • Calm, quiet driving experience • Ready for (semi) automated fu

The new „Green Efficiency Drive“, an electric travel drive concept for Pick & Carry... ... a world premiere at bauma.

SENNEBOGEN Maschinenfabrik GmbH Hebbelstraße 30 94315 Straubing, Germany Tel. +49 94 21 540-0 [email protected] www.sennebogen.com SENNEBOGEN Pte. Ltd. 25 International Business Park # 04-11/12 German Centre Singapore 60 99 16 Tel. +65 6562 826-0 [email protected] www.sennebogen.asia Energy savings systems 299268 190305-200710 SENNEBOGEN LLC 1957 Sennebogen Trail Stanley, North Carolina 28164, USA Tel. +1 704 347-4910 [email protected] www.sennebogen-na.com