Catalogs >
SENNEBOGEN Maschinenfabrik GmbH >
Duty Cycle Crane 670 Crawler

Duty Cycle Crane 670 Crawler
20Pages

Catalog excerpts

321 kW (Stage V) 70 t Duty Cycle Crane

What makes up the E-Series 65 years of experience in designing and constructing duty cycle cranes Uncompromisingly high performance in all areas Technology that can be mastered: High-quality components without over-engineering Long service life and high value retention 1969: The ﬁrst fully hydraulic duty cycle crane anywhere worldwide, SK 15 Top-level performance Maximum usability Flexible operation Maintenance and service made easy Green Efficiency Consultation and support in your area Save fuel - reduce operating costs Work quietly - protect operator and environment Durable mechanical...

Open the catalog to page 2

Casing machine Diaphragm wall grab Grab equipment Crane equipment Crane equipment with ﬁxed ﬂy jib

Open the catalog to page 3

Technical data, equipment MACHINE TYPE High-performance ﬁltration with long change interval, contamination indicator Model (type) Hydraulic tank 770 l (670 l up to middle of sight glass) Control system Proportional, precision hydraulic servo control of the movements, 2 servo joysticks for work functions, additional functions via switches and foot pedals - arranged clearly and ergonomically ENGINE Power Direct injection, turbocharged, charge air cooling, reduced emissions, automatic idle/stop Cooling Dry ﬁlter with pre-separator, automatic dust discharge, main element and safety element,...

Open the catalog to page 6

Technical data, equipment EQUIPMENT Design Decades of experience, state-of-the-art computer simulation, superlative stability and service life Boom adjustment winch Bent-axis hydraulic engine drive with compact planetary gear, 52 kN tensile force; cable diameter 14 mm, adjustment speed 15° to 81° in approx. 48 sec. Safety brake Spring-loaded multi-disk brake Auxiliary boom for load capacities up to 12 t Fixed ﬂy up to 18 m Steel cable rollers Auxiliary cable rollers for grab operation HD cable rollers for working with optimized cable guidance Load moment limitation for lifting gear...

Open the catalog to page 7

Equipment Main boom 60° Boom conﬁguration Boom length 12.1 Lower boom section type 1442 Boom section type 1442 Boom section type 1442 Boom section type 1442 Head piece type 1442 Auxiliary boom S124 (optional) Technical features and dimensions subject to change.

Open the catalog to page 8

Load ratings Main boom Boom length [m] Technical features and dimensions subject to change. Auxiliary boom S12.4 max. lifting capacity 12.0 t 1166 Notes: 1. The load ratings given apply when the machine is on a ﬁrm and level surface. 2. The load ratings are given in tons and apply 360 degrees. 3. The load capacities are in observance of standards ISO 4305 Tab. 1+2 as well as the tilt angle method (4° tilt angle). 4. The weight of the load handling equipment (hooks, suspension gear) should be deducted from the load capacities. 5. The load ratings apply for the maximum undercarriage track...

Open the catalog to page 9

Equipment Main boom Fixed ﬂy boom Technical features and dimensions subject to change.

Open the catalog to page 10

Load ratings Main boom with ﬁxed ﬂy jib differential jib angle 25° Boom length [m] Notes: 1. The load ratings given apply when the machine is on a ﬁrm and level surface. 2. The load ratings are given in tons and apply 360 degrees. 3. The load capacities are in observance of standards ISO 4305 Tab. 1+2 as well as the tilt angle method (4° tilt angle). 4. The weight of the load handling equipment (hooks, suspension gear) should be deducted from the load capacities. 5. The load ratings apply for the maximum undercarriage track width of 3840 mm. 6. Load capacities must be limited or reduced in...

Open the catalog to page 11

Load ratings Main boom with FS ﬁxed ﬂy jib differential jib angle 5° Boom length [m] Notes: 1. The load ratings given apply when the machine is on a ﬁrm and level surface. 2. The load ratings are given in tons and apply 360 degrees. 3. The load capacities are in observance of standards ISO 4305 Tab. 1+2 as well as the tilt angle method (4° tilt angle). 4. The weight of the load handling equipment (hooks, suspension gear) should be deducted from the load capacities. 5. The load ratings apply for the maximum undercarriage track width of 3840 mm. 6. Load capacities must be limited or reduced...

Open the catalog to page 12

Boom conﬁguration Main boom with ﬁxed ﬂy jib Boom conﬁguration Main boom Boom lower section type 1442 Boom section type 1442 Boom section type 1442 Boom section type 1442 Boom head piece type 1442 Fly boom lower section type 598 Fly boom lower section type 598 Fly boom head piece type 598 Combination options Boom conﬁguration Fixed ﬂy jib length Hook For 160 kN winch with 26 mm cable diameter Capacity For 200 kN winch with 28 mm cable diameter Cable strands and max. load capacity [kg] Cable strands and max. load capacity [kg] Technical features and dimensions subject t

Open the catalog to page 13

Notes: 1. The load ratings given apply when the machine is on a ﬁrm and level surface. 2. The load ratings are given in tons and apply 360 degrees. 3. The load ratings apply to the maximum stabilizer/undercarriage track width of 3840 mm. 4. The load ratings include the grab weight and do not exceed 66.7 % of the tipping load 5. For operation with a mechanical two-rope grab and even load distribution on the closing and holding ropes, the load capacity is limited by the permissible cable pull or the maximum tensile force of a winch: Wince tensile force [kN] 160 200 Cable diameter [mm] 26 28...

Open the catalog to page 14

Dragline bucket equipment 40° ce e guidan mal cabl Opti BOGEN o SENNE thanks t stem sy Fairlead 4 6 8 10 12 32 30 28 26 24 22 20 18 16 14 12 10 Notes: 1. The speciﬁed load ratings given apply when the machine is on a ﬁrm and level surface. 2. The load ratings are given in tons and apply 360 degrees. 3. The load ratings apply to the maximum stabilizer/undercarriage track width of 3840 mm. 4. The load ratings include the dragline bucket weight and do not exceed 75 % of the tipping load. 5. The load capacity is limited by the maximum cable pull and/or by the maximum tensile force of one winch...

Open the catalog to page 15

Basic machine dimensions 13061 670 R with 22 t counterweight, T83/990 telescoping undercarriage, lower boom section, 2 x 16 t freefall winch, approx. 67.8 t 13061 9314 670 R without counterweight, lower boom section, 2 x 16 t freefall winch, approx. 45.8 t Technical features and dimensions subject to change.

Open the catalog to page 16

Duty Cycle Crane 670 Crawler 20Pages

Catalog excerpts

All SENNEBOGEN Maschinenfabrik GmbH catalogs and technical brochures

Duty Cycle Crane 670 Crawler
20Pages