
SHEAR SOLUTIONS FOR RECYCLING
Open the catalog to page 1FOR EVERY APPLICATION THE RIGHT MACHINE Growing demands for safety at work and ever stricter environmental regulations require machine tools that actively help to reduce CO2 emissions in a safe manner. OUR SHEAR SOLUTIONS Use our shears and attachments for flexible, efficient and precise operation. APPLICATIONS AND ADVANTAGES OF MOBILE SCRAP SHEARS 2ND BOOM Use with heavy shears Use with light/medium shears VARIO TOOL Machine as multi-carrier with fully automatic quick-change system 825 E VT 830 E VT 835 E VT Information and reports on the use of shears in recycling can also be found at www.sennebogen.com...
Open the catalog to page 2ADVANTAGES OF MOBILE SCRAP SHEARS COMPARED TO FLAME CUTTING IN THE RECYCLING PROCESS ADVANTAGES OF MOBILE SCRAP SHEARS ON A SENNEBOGEN MATERIAL HANDLER Safe operation with significantly lower risk of injury More attractive working environment – safe and easier working without manual flame cutting ENVIRONMENT Compliance with air emission laws Lower CO2 emissions Improved air quality in the work environment COST Faster processing: up to 10-fold increases in tons handled per hour Lower operating costs: up to 70% reduced costs per ton No costs for exhaust gas collection systems/air pollution control...
Open the catalog to page 3# Maximum shear sizes for heavy duty applications # Machine works exclusively with the shear # Curved boom variant “banana” for better working kinematics at close range # Maximum stability and control thanks to the direct connection of the shear, enabling more precise cuts and increased efficiency BOOM LENGTH approx. 6 m approx. 6 m approx. 6 m approx. 7 m approx. 7 m approx.8 m 840 E Electro - 2nd banana boom 7.0 m with 8.9 t shears technical description according to price list on request
Open the catalog to page 4# Versatility through interchangeable attachments from material handling to shearing applications # Compatibility: ex-works preparation for all quick-change systems # Large reaches 830 E - reach 10 m with 3 t shears technical description according to price list on request
Open the catalog to page 5Vario Tool Vario Tool Vario Tool The SENNEBOGEN Vario Tool offers a number of advantages that make it an indispensable tool for varied use in scrapyards and steelworks. ONE BASIC SYSTEM FOR VARIOUS ATTACHMENTS: # Large shears M Orange peel grab # Sorting grab COUPLING PROCESS The stick/shear can be set down without a set-down frame - directly on the ground Quick and safe changing of the Vario Tool Arm from the driver's seat Fully automatic coupling Proven technology over many years The machine is a multi-tool carrier VARIO TOOL ADVANTAGES 825 E VARIO TOOL MAXIMUM VERSATILITY # With the Vario...
Open the catalog to page 6EI Vario Tool LOAD RATINGS LOAD RATINGS MP26 mMaxcab E270, hydraulically elevating MP30 7.2 m compact boom 5.7 m grab stick Maxcab E270, hydraulically elevating Notes: All load ratings are given in tons (t) brought to bear at the end of the stick, without tools on firm level ground. Working tools such as grab, magnet, load hook, etc. are included in the specified load ratings. The stated values are 75 % of the static tipping load or 87 % of the hydraulic lifting force according to ISO10567. According to EU standard EN 474/5, hydraulic material handlers used for hoisting must be equipped with...
Open the catalog to page 7Vario Tool 7.0 m compact boom 6.3 m grab stick Maxcab E270, hydraulically elevating 835 E Vario Tool with 5.9 t shears [m] Notes: All load ratings are given in tons (t) brought to bear at the end of the stick, without tools on firm level ground. Working tools such as grab, magnet, load hook, etc. are included in the specified load ratings. The stated values are 75 % of the static tipping load or 87 % of the hydraulic lifting force according to ISO10567. According to EU standard EN 474/5, hydraulic material handlers used for hoisting must be equipped with a pipe rupture safety device on lifting...
Open the catalog to page 8This catalog describes machine models, the scope of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machines delivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations may contain optional and supplementary equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may...
Open the catalog to page 917 Pages
19 Pages
15 Pages
28 Pages
36 Pages
25 Pages
21 Pages
25 Pages
25 Pages
3 Pages
19 Pages
21 Pages
41 Pages
35 Pages
29 Pages
29 Pages
28 Pages
48 Pages
18 Pages
44 Pages
20 Pages
11 Pages
318 Pages
34 Pages
56 Pages
48 Pages
31 Pages
20 Pages
12 Pages
42 Pages
16 Pages
44 Pages
16 Pages
20 Pages
48 Pages
12 Pages
28 Pages
44 Pages
16 Pages
23 Pages
40 Pages
20 Pages
40 Pages
24 Pages
28 Pages
24 Pages
28 Pages
28 Pages
20 Pages
20 Pages
20 Pages
23 Pages
13 Pages
28 Pages
20 Pages
20 Pages
20 Pages
20 Pages
20 Pages
9 Pages
20 Pages
17 Pages
15 Pages
24 Pages
16 Pages
20 Pages
20 Pages
32 Pages
32 Pages
16 Pages
12 Pages
32 Pages
32 Pages
88 Pages
6 Pages
72 Pages
4 Pages
68 Pages
4 Pages
32 Pages
60 Pages
4 Pages
19 Pages
32 Pages
28 Pages