261 kW (Stage V) 268 kW (Stage IIIa) 250 kW (Electro) 97 - 125 t 27 m Mobile material handling machine

Advanced. The E-Series What makes up the E-Series 65 years of experience in designing and constructing hydraulic material handling machines Uncompromisingly high performance in all areas: Focus on material handling Technology that can be mastered: High-quality components without over-engineering Long service life and high value retention 1962: rope-driven S833 with elevated operator cab Top-level performance Maximum usability Maximum safety Maintenance and service made easy Green Efficiency Consultation and support in your area Save fuel - reduce operating costs Work quietly - protect operator...

Subject to change. Additional options available upon request.

Four ways to save fuel Work Savings of up to 20 %: Work in EcoMode with reduced engine speed Automatic idle reduces engine speed by 40 % of the operating speed Stop automation switches the engine off when not needed Optimized engine settings, reduced specific fuel consumption, state-of-the-art exhaust aftertreatment Quiet operation Consistently quiet operation thanks to decoupled engine mounts and soundproofing in the doors Sound pressure level in accordance with 2000/14/EC as much as 2 dB lower than required High-capacity cooling Constant, reliable performance thanks to large-scale, robust fans...

Maximum safety Powerful hydraulic system Strong pumps with power reserves Top efficiency thanks to large hydraulic valves and lines Extra-long change intervals of 4,000 operating hours through initial fill-up with special oil with extended service life when using SENNEBOGEN Hydro Clean* * Option Non-slip work surfaces Safe climbing up to the uppercarriage Hand rails* 1 5 Gallery* 2 cameras to the right and rear Platform with railing next to cab sliding door Protective grating, windshield/roof* Ideal access for maintenance and service

Features optimum cab climate with automatic air conditioning system, partial tinted glass pleasant and equal temperature dispersion by means of 9 nozzles panoramic view comfort seat with air suspension very quiet through optimized noise insulation highest safety & comfort with sliding door, wide door opening ergonomically arranged operating controls for fatigue-free and relaxed working 12 V, 24 V, and USB charging sockets, hands-free telephone preparation, document box various options: electric cool box behind driver´s seat, seat air conditioning Joysticks on resonant, seatmounted consoles Comfortable...

Maintenance and service made easy. Optimized for maintenance Fast and easy diagnostis thanks to the clearly labeled electrical distributor Easy accessibility to all service points of the machine Automatic central lubrication for equipment and slewing gear raceway SEN SENNEBOGEN HydroClean* Hyd Optim Optimal protection of hydraulic hydr components thanks to 3 μm comp micro-filter micr Clean Cleaner hydraulic oil, extended oil service life exte Central measuring points Clear labeling Easily accessible Quick checking of the entire hydraulic system All parts labeled with a unique part number Easy...

Modular design - versatile solutions Attachments Equipment options (others available upon request) Orange peel grab Clamshell grab Magnet plate Timber grab Diesel-hydraulic drive Maxcab Industry Motorized cable reel Undercarriage variants * increased load capacity

Reliable working thanks to robust and FEM optimized equipment Save up to 30 % energy with the energy recovery system - decade -long ex perience - most a dvanced comput er simu lation - the gre ates and lon t degree of stab gest ser vice life ility Better illumination of the work area through powerful LED headlights High load capacities even when fully extended, thanks to massive cylinders Ideal overview and safe working height thanks to stable cab elevation Robust side cover made from recyclable sheet steel Safe entry to the upper carriage thanks to railings, grip handles and non-slip steps Safe...

Technical data, equipment MACHINE TYPE Model (type) Stage V: 261 kW at 1800 min-1 Stage IIIa: 268 kW at 1800 min-1 Cummins 12 (Stage V) Cummins 11 (Stage IIIa) Direct injection, turbo charged, charge air cooler, reduced emissions, Eco Mode, idle automation, stop automation, fuel pre-warming Cooling Diesel filter with water separator and heater Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator Fuel tank Electr. system Load-sensing/ LUDV hydraulic system, hydraulically operated work functions, load limit control Pump type...

Technical data, equipment CAB Sliding door inc. sliding pane, vibration damped, tinted safety glass, front pane can be openend, roof window, windscreen wiper for front pane, radio preparation, air-suspended comfort seat, joystick steering, SENNEBOGEN SENCON control & diagnosis system 30 ° tiltable cab Cab elevation E300/260, can be elevated and moved forward hydraulically Cab elevation Skylift 700/900 Mastercab (Large-capacity port cab) Maxcab Industry Armored-glass windshield Armored-glass sunroof Safety side window and rear window Windscreen wiper for front window/skylight Rolling shade for...

Load ratings Compact boom: Grab stick: Maxcab E270, hydraulically elevating All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped...

Load ratings 6 Machine shown reversed Compact boom: Grab stick: Maxcab E270, hydraulically elevating All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required operating temperature in the Green Hybrid system. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for...