840 M E-Series
20Pages

{{requestButtons}}

Catalog excerpts

840 M E-Series - 1

227 kW (Stage IIIa) 231 kW (Stage V) 200 kW (Electro) 53 t Mobile material handling machine

Open the catalog to page 1
840 M E-Series - 2

Advanced. The E-Series What makes up the E-Series More than 65 years of experience in designing and constructing hydraulic material handling machines Uncompromisingly high performance in all areas: Focus on material handling Technology that can be mastered: Highquality components without over-engineering Long product service life and high value retention 1962: Rope-driven S833 with elevated operator cab Peak performance Maximum usability Maximum safety Maintenance and service made easy Green Efficiency Consultation and support in your area Save fuel - reduce operating costs Work quietly -...

Open the catalog to page 2
840 M E-Series - 3

Subject to technical changes. Further options available upon request.

Open the catalog to page 3
840 M E-Series - 4

Four ways to save fuel Work Up to 20% savings: working in Eco Mode with reduced engine speed Idle automation reduces speed to 40% of operating speed Stop automation switches the engine off when not needed Optimized settings of engine and hydraulics reduces fuel consumption Quiet operation Consistently quiet operation thanks to decoupled engine mounts and soundproofing in the doors Soundpower level according to 2000/14/EC up to 2 dB lower than required Subject to technical changes. Further options available upon request. High-capacity cooling Constant, reliable performance thanks to...

Open the catalog to page 4
840 M E-Series - 5

Maximum safety No-slip work surfaces Hand rails* 1 2 cameras to the right and to the rear Step grid with railing next to cab sliding door 2 Powerful hydraulic system Strong pumps with power reserves Top efficiency thanks to large-dimensioned hydraulic valves and lines Extra-long change intervals of 4,000 operating hours through initial fill-up with special oil with extended service life when using SENNEBOGEN HydroClean* Subject to technical changes. Further options available upon request. *Option

Open the catalog to page 5
840 M E-Series - 6

Features optimum cab climate with automatic air conditioning system, partial tinted glass pleasant and equal temperature dispersion by means of 9 nozzles panoramic view comfort seat with air suspension very quiet through optimized noise insulation Highest safety & comfort with sliding door, wide door opening ergonomically arranged operating controls for fatigue-free and relaxed working 12 V, 24 V, and USB charging sockets hands-free telephone preparation, document box various options: electric cool box behind tric operator`s seat, protective covers, seat ective air conditioning consoles and...

Open the catalog to page 6
840 M E-Series - 7

Maintenance and service made easy. Optimized for maintenance Fast and easy diagnosis thanks to straightforward and clearly labeled electrical distributor Easy access to all service points on the machine Automatic central lubrication for equipment and slewing gear SEN SENNEBOGEN Hydro Clean* Hyd Optim Optimal protection of hydraulic components hydr than thanks to 3 μm microfilter Clean Cleaner hydraulic oil, longer service life longe * Option Central measuring points Easily accessible Quickly inspect entire hydraulic system Clear labeling All parts labeled with a unique part number Easy and...

Open the catalog to page 7
840 M E-Series - 8

Modular structure - versatile solutions Attachments Equipment (additional equipment on request) Orange peel grab Clamshell grab Magnet plate Scrap shears Diesel-hydraulic drive Electro-hydraulic drive Maxcab Industry Motorized cable reel Transformer Variants undercarriage * Additional information on our crawler undercarriages can be found in the separate 840 R E-Series brochure

Open the catalog to page 8
840 M E-Series - 9

Reliable work through robust and FEM-optimized equipment Sliding door for convenient entry and exit, step grid with railing Better illumination of the work area through powerful LED headlights* High load capacities even when fully extended, thanks to massive cylinders Ideal overview and safe working height, thanks to stable cab elevation Safe entry and exit thanks to railings*, grip handles and non-slip steps Robust side cover of recyclable steel sheet High stability due to the broad outrigger area Robust slewing gear (2x) for fast work cycles and highperformance material handling

Open the catalog to page 9
840 M E-Series - 10

Technical data, equipment MACHINE TYPE Model (type) MOTOR Power Stage V: Rated Power: 231 kW at 2100 rpm 237 kW at 2000 rpm / 242 kW at 1800 rpm Stage IIIa: Rated Power: 227 kW at 2000 rpm 254 kW at 1800 rpm Cummins L9 Direct injection, turbo charged, charge air cooling, reduced emissions, ECO mode, idle automation, stop automation, fuel pre-warming Electrical hydraulic tank pre-warming at temperatures under -20 °C Low temperature packages Hydraulically-driven magnetic generator 20 kW Telematic system SENtrack DS HYDRAULIC SYSTEM Load sensing / LUDV hydraulic system, hydraulic,...

Open the catalog to page 10
840 M E-Series - 11

Technical data, equipment CAB Sliding door inc. sliding pane, vibration damped, tinted safety glass, front pane can be openend, roof window, windscreen wiper for front pane, radio preparation, air-suspended comfort seat, joystick steering, SENNEBOGEN SENCON control & diagnosis system Mobile undercarriage with integrated 4-point outrigger, steering axle as hydraulically locking pendulum axle, pendulum axle cylinder with pipe fracture safety valves, type MP42 All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and...

Open the catalog to page 11
840 M E-Series - 12

2.4 Machine shown mirror image Compact boom Grab stick Maxcab E270, hydraulically elevating All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and...

Open the catalog to page 12
840 M E-Series - 13

Machine shown mirror image Compact boom Grab stick Maxcab E270, hydraulically elevating All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75 % of the static tipping load or 87 % of the hydraulic lifting force in accordance with ISO10567. In accordance with EU standard EN 474/5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick...

Open the catalog to page 13

All SENNEBOGEN Maschinenfabrik GmbH catalogs and technical brochures

  1. 6133E

    48 Pages

  2. 655

    18 Pages

  3. 7700_G

    44 Pages

  4. 9300

    20 Pages

  5. 818 M

    20 Pages

  6. Service Catalog

    318 Pages

  7. 8400 EQ

    16 Pages

  8. 6140 E

    20 Pages

  9. 6133 E

    48 Pages

  10. 6113_M

    12 Pages

  11. 5500 G

    44 Pages

  12. 1100

    16 Pages

  13. 895_R

    20 Pages

  14. 875 E hybrid

    40 Pages

  15. 870 E hybrid

    28 Pages

  16. 870 R

    32 Pages

  17. 865 E hybrid

    40 Pages

  18. 860 M E-Series

    24 Pages

  19. 855E M Hybrid

    28 Pages

  20. 855 E Hybrid

    24 Pages

  21. 850 M

    28 Pages

  22. 850 R

    28 Pages

  23. 840 R

    20 Pages

  24. 835 G Hybrid

    23 Pages

  25. 830 R-HDD

    20 Pages

  26. 825 M E-Series

    20 Pages

  27. 825 R-E

    20 Pages

  28. 821 M E-Series

    20 Pages

  29. 818 R E-Series

    20 Pages

  30. 817 M E-Series

    20 Pages

  31. 730 MHD

    16 Pages

  32. 728 M

    24 Pages

  33. 723 E-Series

    16 Pages

  34. 643 M

    32 Pages

  35. 643_R

    32 Pages

  36. 624 Mobile

    12 Pages

  37. Demolition

    6 Pages

  38. Maxcab_cabin

    4 Pages

  39. Port

    102 Pages

  40. Attachments

    32 Pages