1 119 kW (Stage IIIa) 1 129 kW (Stage IV) (St 50 t Telescopic crawler crane

Over 25 years of experience in construction and building of highly specialized telescopic cranes Uncompromisingly high performance in all areas Long service life and high value stability TX10 telescopic crane Save fuel – reduce operating costs Work quietly – protect operator and environment Maximum usability Easy transport Maintenance and service made easy Peak performance Consultation and support in your area Robust boom system – work on an incline of up to 4° Operate under full load – less space required Mobile undercarriage with outrigger – ready to go in no time SENNEBOGEN control system...

Full power boom Work on inclines of up to 4° possible* Telescoping under load Precision hydraulics allow telescoping to any boom length quickly Intuitive joystick control Ready to go in no time, even with varying work heights Always the ideal boom length in no time at all Moveable even under high loads Excellent maneuverability thanks to strong undercarriage traction Easy, inexpensive transport and short setup time Maximum stability due to long, telescopic crawler chassis with large outrigger area Low ground pressure due to wide crawler shoes, reli able stability even during dynamic tasks Robust...

Two hoisting winches working side by side Compact machine with small rear radius Consistently quiet operation due to decoupled en Sound pressure level in accordance with 2000/14/EC lower than required Engine Stage IIIa emission standards Engine Stage IV emission standards incl. AdBlue supply

optimum cab climate with automatic air conditioning system, partial tinted glass pleasant and equal temperature disper panoramic view climatic comfort seat with air suspensi on and air conditioning* very quiet through optimized noise insulation Highest safety & comfort with sliding door, wide door opening ergo 12 V, 24 V, and USB charging sockets cument box various options: electric cooler behind`s, tric protective covers, seat air conditioning at consoles and ergonomic joysticks ticks that move with the seat pleasant grip through ergonomic design mic precise control of all movements ents through...

Central, easily accessible lubricating strip Optional: central lubrication system for automatic lubrication Boom pivot point Winch drum bearing pivot point Slewing ring (roller raceway) optim optimal protection of hydra hydraulic components Clean Cleaner hydraulic oil, exten extended oil service life With water separator Platform next to cab for more safety while entering and exiting Platforms along left and ride sides of uppercarriage for safe mainte nance t l lubricating Central l b i ti strip Fast and easy troubleshooting thanks to straightforward and clearly labeled electrical distributor...

MACHINE TYPE Model (type) Automatic central lubrication for boom track and winch drum bearing Pinion tooth lubrication for slewing ring ENGINE Model Cummins QSB 4.5 diesel motor, 119 kW/162 hp at 2,200 rpm Stage IIIa emission standard Cummins QSB 4.5 diesel motor, 129 kW/175 hp at 2,200 rpm Stage IV emission standard cooling, reduced emissions HYDRAULIC SYSTEM controlled work functions, load limit sensing control Pump type bution for simultaneous, independent control of work functions Pump control Cooling With water separator and heating system automatic dust discharge, main element and safety...

Sliding door, excellent ergonomics, climate fast and easy setup without auxiliary de vices, locked on basic boom when not in use Fly boom extension to 13 m, tiltable (0°, 40°) 2nd crane winch with 50 kN pulling power cable diameter and 170 m cable length Additional load charts accepted for 2°/4° incline position connections, SENCON, roof window, sliding windows on the driver's side Options Cab type E270, can be elevated 270 cm Cab can be tilted 15° Auxiliary heating system with timer Remote radio control Working range restriction UNDERCARRIAGE Design Safety side window and rear window Sunblind...

Hook Capacity Rope reeving and max. load capacity Subject to change. See page 17 for notes on load lift charts.

Parts reeving Subject to change. See page 17 for notes on load charts.

Subject to change. See page 17 for notes on load charts.

Telescopic boom length [m] 16.3 23.8 Subject to change. See page 17 for notes on load charts.

Telescopic boom length [m] 16.3 23.8 Subject to change. See page 17 for notes on load charts.

Subject to change. See page 17 for notes on load charts.

3. Load ratings are in accordance with EN 13000. 4. The weight of the load handling devices (e.g., hook, cable) must be subtracted from the load ratings. 5. Load ratings must be limited or reduced when conditions are unfavorable, such as soft or uneven ground, slopes, wind, lateral loads, swinging loads, jerking or sudden stopping of load, operator inexperience, driving with load. 8. Optional load capacities available for 2° and 4° incline positions.

crawler shoes *depends on base plate

SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary in a tolerance range depending on the country to which the machines are delivered, especially in regard to standard and optional equipment All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners. SENNEBOGEN Maschinenfabrik GmbH Sennebogenstrasse 10 [email protected] expressly stipulated upon conclusion of the contract....